Optimizing Cu content in TiN/Cu Coatings on NiTi for biomedical performance

TiN/Cu composite coatings containing 2.7, 4.1, and 6.8 at% Cu were deposited on NiTi substrates by RF magnetron sputtering to investigate the effect of Cu content on their multifunctional performance. The microstructure, phase composition, hardness, corrosion resistance, ion release, antibacterial activity, bioactivity, and cytocompatibility were systematically evaluated. Increasing Cu content enhanced antibacterial activity against Staphylococcus aureus , while a reduction in hardness, corrosion resistance, apatite-forming ability, and cellular response was observed. The coating containing 2.7 at% Cu (S 1 ) exhibited the highest hardness (≈400 HV) and charge-transfer resistance (90.18 kΩ·cm 2 ), indicating superior mechanical and electrochemical performance. All coatings significantly reduced Ni 2 ⁺ release from the NiTi substrate, while Cu 2 ⁺ release remained below the reported cytotoxic level. S 1 also exhibited the most favorable bioactivity, with dense apatite formation and a Ca/P ratio of 1.58. MTT analysis using MG-68 cells showed cell viabilities of 86%, 72%, and 66% for S 1 , S 2 , and S 3 , respectively, consistent with fluorescence microscopy observations. Although S 3 exhibited the strongest antibacterial activity, its electrochemical and biological performance decreased. Overall, S 1 provided the most balanced combination of mechanical, electrochemical, bioactive, and cytocompatibility properties, while S 3 showed superior antibacterial performance.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-14
DOI
https://doi.org/10.1038/s41598-026-78308-5
Primary Topic
Surface Treatment and Coatings
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Optimizing Cu content in TiN/Cu Coatings on NiTi for biomedical performance

Mohammad Yousef Memar, Mohammad Javad Salek Rahimi, Abbas Kianvash, Mohammad Rezvani
2 links
Scientific Reports
Surface Treatment and Coatings
article

Optimizing Cu content in TiN/Cu Coatings on NiTi for biomedical performance

Mohammad Yousef Memar, Mohammad Javad Salek Rahimi, Abbas Kianvash, Mohammad Rezvani
article en

Abstract

TiN/Cu composite coatings containing 2.7, 4.1, and 6.8 at% Cu were deposited on NiTi substrates by RF magnetron sputtering to investigate the effect of Cu content on their multifunctional performance. The microstructure, phase composition, hardness, corrosion resistance, ion release, antibacterial activity, bioactivity, and cytocompatibility were systematically evaluated. Increasing Cu content enhanced antibacterial activity against Staphylococcus aureus , while a reduction in hardness, corrosion resistance, apatite-forming ability, and cellular response was observed. The coating containing 2.7 at% Cu (S 1 ) exhibited the highest hardness (≈400 HV) and charge-transfer resistance (90.18 kΩ·cm 2 ), indicating superior mechanical and electrochemical performance. All coatings significantly reduced Ni 2 ⁺ release from the NiTi substrate, while Cu 2 ⁺ release remained below the reported cytotoxic level. S 1 also exhibited the most favorable bioactivity, with dense apatite formation and a Ca/P ratio of 1.58. MTT analysis using MG-68 cells showed cell viabilities of 86%, 72%, and 66% for S 1 , S 2 , and S 3 , respectively, consistent with fluorescence microscopy observations. Although S 3 exhibited the strongest antibacterial activity, its electrochemical and biological performance decreased. Overall, S 1 provided the most balanced combination of mechanical, electrochemical, bioactive, and cytocompatibility properties, while S 3 showed superior antibacterial performance.

Scientific Reports
Tabriz University of Medical Sciences (IR), University of Tabriz (IR)
University of Tabriz
Surface Treatment and Coatings
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon
Optimizing Cu content in TiN/Cu Coatings on NiTi for biomedical performance — Mohammad Yousef Memar, Mohammad Javad Salek Rahimi, et al. · Scientific Reports (2026) | TGRS Research Map | TGRS