Effect of Moisture on the Mechanical Properties of Limestone and Limerock Used as Pavement Base Aggregates in High-Flood-Risk Conditions

Abstract In several states, limestone is one of the primary rock types used in roadway construction as pavement base aggregates. Limerock, derived from the in-place weathering of limestone, is another rock commonly found and used in states such as Florida. In recent years, the number of requests for approval of locally mined limerock in Alabama has increased due to potential economic benefits associated with its use. However, the potential moisture sensitivity of limerock is a concern that has not been fully addressed, because it can impact the long-term performance of pavements, which are increasingly affected by climate-related water stressors. Thus, this study evaluated the effect of moisture, over a broad spectrum ranging from a very dry state to complete saturation, on the mechanical behavior of crushed limestone and limerock. The resilient modulus of three limestone aggregates and four limerock aggregates were determined at four different moisture contents, including full saturation. The results demonstrated that the resilient modulus of limestone and limerock increased significantly with decreasing moisture content when drying from the optimum moisture content. When saturated, some limestone and limerock sources experienced substantial reductions in stiffness, whereas others did not. Significant reductions occurred in aggregate sources that contained a large number of particles finer than 4.75 and/or 0.075 mm and had a high content of claylike materials or plastic fines. These findings are valuable for pavement design and construction material selection to achieve more-sustainable and climate-resilient pavements.

Authors

Institutions

Publication Details

Journal
Journal of Materials in Civil Engineering
Published
2026-11-14
DOI
https://doi.org/10.1061/jmcee7.mteng-23628
Primary Topic
Geotechnical and construction materials studies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Effect of Moisture on the Mechanical Properties of Limestone and Limerock Used as Pavement Base Aggregates in High-Flood-Risk Conditions

Benjamin F. Bowers, Don Guy V. V. Biessan, Scott W. George, Christopher Huner et al.
Journal of Materials in Civil Engineering
Geotechnical and construction materials studies
article

Effect of Moisture on the Mechanical Properties of Limestone and Limerock Used as Pavement Base Aggregates in High-Flood-Risk Conditions

Benjamin F. Bowers, Don Guy V. V. Biessan, Scott W. George, Christopher Huner, J. Brian Anderson, Chance Armstead
article en

Abstract

Abstract In several states, limestone is one of the primary rock types used in roadway construction as pavement base aggregates. Limerock, derived from the in-place weathering of limestone, is another rock commonly found and used in states such as Florida. In recent years, the number of requests for approval of locally mined limerock in Alabama has increased due to potential economic benefits associated with its use. However, the potential moisture sensitivity of limerock is a concern that has not been fully addressed, because it can impact the long-term performance of pavements, which are increasingly affected by climate-related water stressors. Thus, this study evaluated the effect of moisture, over a broad spectrum ranging from a very dry state to complete saturation, on the mechanical behavior of crushed limestone and limerock. The resilient modulus of three limestone aggregates and four limerock aggregates were determined at four different moisture contents, including full saturation. The results demonstrated that the resilient modulus of limestone and limerock increased significantly with decreasing moisture content when drying from the optimum moisture content. When saturated, some limestone and limerock sources experienced substantial reductions in stiffness, whereas others did not. Significant reductions occurred in aggregate sources that contained a large number of particles finer than 4.75 and/or 0.075 mm and had a high content of claylike materials or plastic fines. These findings are valuable for pavement design and construction material selection to achieve more-sustainable and climate-resilient pavements.

Journal of Materials in Civil EngineeringVol. 39(3)
Georgia Department of Transportation (US), Auburn University (US)
Geotechnical and construction materials studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon