A combined damper system for mitigation of rain-wind and high-mode vortex-induced vibrations in long cables
To overcome the limited effectiveness of conventional dampers in suppressing high-order modes susceptible to vortex-induced vibration (VIV), this study proposes a combined damper system that provides a lateral damping force through Damper 1 and a rotational damping moment through Damper 2, which is equipped with a rigid cantilever. A linear finite element model that accounts for support flexibility and optional inerter integration is developed. Theoretical modal results indicate that Damper 2 increases the damping ratios of modes 32–36 by more than 200% while causing little change in the low-order modal damping provided by Damper 1. The performance of Damper 2 is sensitive to the relative bending stiffness of the cable and the support stiffness. Specifically, increasing [Formula: see text], corresponding to a decrease in [Formula: see text] relative to [Formula: see text], can reduce the target modal damping by up to 44%, whereas insufficient support stiffness may substantially impair the effectiveness of the rotational damper (Damper 2). Adding an inerter in parallel with Damper 2 can increase the target modal damping ratios by 183%–793% while allowing a lower optimal damping coefficient for Damper 2. A sequential optimization framework is formulated for low-frequency modes associated with rain–wind-induced vibration (RWIV) and selected high-order modes susceptible to VIV. The results demonstrate the theoretical effectiveness of the proposed system in enhancing modal damping within the assumptions of the linear model.
Authors
- Fangdian Di (ORCID: https://orcid.org/0009-0003-6384-1317)
Publication Details
- Journal
- International Journal of Structural Stability and Dynamics
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1142/s0219455428500885
- Primary Topic
- Vibration and Dynamic Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00