Optimization design and dynamic analysis of a Kresling origami quasi-zero stiffness vibration isolator
Quasi-zero stiffness isolator has a high-static-low-dynamic stiffness, which can meet the low-frequency vibration isolation requirements. Most of the quasi-zero stiffness isolators with origami structures use springs as the creases which will generate significant lateral bending when subjected to larger loads. In this work, a novel bio-inspired Kresling quasi-zero stiffness isolator is proposed and replacing springs with the curved beams as the Kresling quasi-zero stiffness isolator creases. A finite element analysis model is established to verify the proposed curved beam stiffness calculation method. The quasi-zero stiffness characteristics of Kresling quasi-zero stiffness isolator are investigated and the polynomial functions are used to fit the force–displacement characteristics. Moreover, the dynamic model of a single degree of freedom system with n th order polynomial quasi-zero stiffness is established. The vibration response and vibration transmissibility of the system are derived by using the harmonic balance method. Furthermore, the vibration transmissibility of the system obtained by the analytical and numerical method is compared to show the correctness of the analytical method. Finally, the effects of the excitation amplitude and damping ratio on the vibration transmissibility are analyzed.
Authors
- Jing Liu (ORCID: https://orcid.org/0000-0003-2323-3475)
- Xinbin Li (ORCID: https://orcid.org/0000-0001-6961-3962)
- Jianyu Liu (ORCID: https://orcid.org/0009-0004-6393-5011)
- Yajun Xu
Institutions
- Northwestern Polytechnical University (CN)
- Aero Engine Corporation of China (China) (CN)
Publication Details
- Journal
- Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1177/14644193261505252
- Primary Topic
- Vibration Control and Rheological Fluids
- Type
- article
- Field-Weighted Citation Impact
- 0.00