The Stress Dip Beneath a Conical Heap: Base Pressure Distribution for Poured Sand
A conical heap of sand does not press hardest on the ground beneath its apex. Measurements consistently find a dip: the base pressure peaks in a ring partway out and falls toward the centre. For a sand heap 1 m tall of mass 3,682.8 kg, this paper computes the hydrostatic reference pressure of 1.570e+04 Pa, a central pressure reduced to 9,731.5 Pa, a dip fraction of 0.3800, and a ring peak of 1.381e+04 Pa at 0.5500 of the base radius. The mean base pressure of 5,232.0 Pa closes the budget: the dip redistributes load, it does not remove it, and foundations under stockpiles must be designed for the ring, not the average.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24225455
- Primary Topic
- Geotechnical Engineering and Soil Mechanics
- Type
- article
- Field-Weighted Citation Impact
- 0.00