Effect of Bio-Inspired Surface Textures On Friction and Wear Under Solid-Lubricated Conditions
Abstract Surface texturing offers a promising approach for improving tribological performance; however, systematic comparisons of different bio-inspired texture architectures under solid-lubricated conditions remain limited. This study investigates the tribological behaviour of conventional dimple and bio-inspired honeycomb and snakeskin textures fabricated on tungsten carbide pins using laser machining. Pin-on-disc experiments were conducted against AA6061 discs under MoS2-grease-based solid lubrication at rotational speeds of 250 and 1250 rpm. The coefficient of friction (COF), post-test mass variation, wear depth, wear cross-sectional area, and surface morphology were evaluated, while SEM and EDS analyses characterized material transfer and surface evolution. At 250 rpm, the dimple, honeycomb, and snakeskin textures reduced the COF by approximately 36%, 41%, and 59%, respectively, compared with the plain pin. At 1250 rpm, the corresponding reductions were approximately 51%, 51%, and 53%. The snakeskin texture exhibited the lowest COF, wear depth, and wear cross-sectional area at both rotational speeds. The dimple texture exhibited the highest pin mass gain and the lowest net disc mass loss among textured conditions, accompanied by greater accumulation of Al adhered material within its cavities. SEM and EDS observations support aluminium material transfer and adhesion on the textured WC surfaces. Overall, the results demonstrate that different texture architectures produce distinct combinations of friction, wear, mass variation, and material-transfer behaviour under the investigated conditions. These findings provide a comparative experimental basis for evaluating bio-inspired textured surfaces for potential application in solid-lubricated engineering and cutting-tool applications.
Authors
- Joyson Selvakumar
- Samuel Raj
Institutions
- Anna University, Chennai (IN)
Publication Details
- Journal
- Journal of Micro and Nano-Manufacturing
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1115/1.4072783
- Primary Topic
- Tribology and Lubrication Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00