Effect of ultrasonic vibration frequency on material removal mechanism and surface finishing performance of additively manufactured fuel nozzles during abrasive flow machining
Additively manufactured aerospace fuel nozzles possess complex internal channels and superior structural integration; however, their practical application is restricted by poor surface quality caused by powder adhesion and the balling effect during additive manufacturing. Ultrasonic-assisted abrasive flow machining (UAAFM) provides a promising solution for improving the surface integrity of such complex components, while the influence mechanism of ultrasonic parameters on abrasive flow behavior and material removal remains insufficiently understood.In this study, a coupled acoustic–flow–particle numerical model was developed to investigate the effect of ultrasonic vibration frequency on the machining characteristics of additively manufactured fuel nozzles. The transient interaction among ultrasonic excitation, abrasive flow behavior, and particle transport was analyzed based on a turbulence model, non-Newtonian abrasive medium model, and Lagrangian particle tracking method. The effects of ultrasonic frequencies ranging from 25 to 80 kHz on velocity distribution, dynamic pressure, wall stress, and abrasive particle motion were systematically investigated. Furthermore, experimental investigations under ultrasonic frequencies of 0–80 kHz were performed using laser confocal microscopy and scanning electron microscopy to validate the simulation results.The results demonstrate that ultrasonic vibration significantly enhances abrasive particle activity and improves the micro-cutting capability during abrasive flow machining. An optimal machining condition was achieved at 25 kHz, where enhanced flow disturbance, acoustic cavitation-assisted effects, and abrasive impact behavior reached a favorable balance. Under this condition, the surface roughness was reduced to 0.268 μm, representing approximately 90% improvement compared with conventional abrasive flow machining without ultrasonic assistance. Excessively high ultrasonic frequencies weakened the effective energy transfer due to increased attenuation, resulting in reduced material removal capability.This work provides new insights into the frequency-dependent material removal mechanism in ultrasonic-assisted abrasive flow machining and offers an effective strategy for precision finishing of additively manufactured aerospace components with complex internal structures.
Authors
- Jikun Hou
- 贺晓彬
- Jianhe Liu (ORCID: https://orcid.org/0000-0003-2473-858X)
- Mei Zhu (ORCID: https://orcid.org/0000-0002-5992-0149)
- Zengwei Zhou
- 孟庆鑫
- Zhao Weihong
- Liang Xu (ORCID: https://orcid.org/0000-0003-4520-7323)
- Gaopeng Shuai
- Weiyang Fang
- Haihong Wu
- Chuanfeng Wang
- Junye Li
- Guiling Wu
- Bin Lv
- Zhenguo Zhao
Institutions
- Changchun University of Science and Technology (CN)
- Shanghai Academy of Spaceflight Technology (CN)
Publication Details
- Journal
- Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1177/09544100261508148
- Primary Topic
- Advanced Surface Polishing Techniques
- Type
- article
- Field-Weighted Citation Impact
- 0.00