Constraint-Based Inverse Design of Ambient-Cured Polymer Networks: Connectivity, Fracture Bounds, and Uncertainty-Aware Candidate Selection
We propose a constraint-based inverse design method for two-component (2K), ambient-curedpolymer networks, starting from a prescribed tensile target rather than a monomer recipe. An idealizedstrand model relates stiffness and axial capacity to active strand density, orientation, length,stiffness, and limiting force. We derive an inverse concentration bound and demonstrate an exactdegeneracy: modulus and nominal strength cannot uniquely identify network topology. Reactantequivalentbalances are coupled to a crack-sensitive fracture condition and thermal, kinetic, andprocessing restrictions. An illustrative target of 126MPa tensile strength in neat resin is used onlyas a design requirement. Assuming a linear strain of 2.5%, the corresponding modulus requirementis 5.04GPa; a 50 μm ideal crack with geometry factor 1.12 requires approximately 1.77MPa√mtoughness under linear-elastic fracture mechanics. A nominal epoxy–amine balance motivates tenplanned formulations spanning aromatic fraction, functional-group content, molecular mass, andhardener chemistry. A hierarchical Bayesian procedure is specified for subsequent experimentalupdates. No proposed material has been synthesized or validated in this work. The result is areproducible theoretical screening methodology and falsifiable experimental plan, not a claim ofachieved performance.
Authors
- JORGE ARIEL MORA
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24223331
- Primary Topic
- Epoxy Resin Curing Processes
- Type
- article
- Field-Weighted Citation Impact
- 0.00