In Situ Polymerized PDOL-TPEG Solid Polymer Electrolyte with Enhanced Oxidative Stability for Solid-State Lithium Metal Batteries
Abstract Solid polymer electrolytes (SPEs) are promising candidates for safer high-performance solid-state lithium batteries because of their flexibility and substantial cost advantages. However, their practical application is still limited by low room temperature ionic conductivity, poor interfacial compatibility, and the extensive use of solvents during fabrication. Herein, a three-dimensional cross-linked polymer network electrolyte, denoted as PDOL-3%TPEG, was prepared by the in situ polymerization of 1,3-dioxolane (DOL) and trimethylolpropane triglycidyl ether (TPEG) within a glass fiber framework. The obtained SPE exhibits a high ionic conductivity of 6.25 × 10–4 S cm–1 at room temperature and a wide electrochemical stability window exceeding 5.3 V. The Li/PDOL-3%TPEG/Li symmetric cell delivers stable cycling for over 1200 h at room temperature with a low overpotential of 130 mV. Moreover, the assembled LFP/PDOL-3%TPEG/Li cell maintains stable cycling for more than 400 cycles at 1 C with a capacity retention of 88%, while the LCO/PDOL-3%TPEG/Li cell also operates steadily for over 400 cycles at 1 C with a capacity retention of 81.5%. This work provides a feasible strategy for developing safe and environmentally friendly SPEs with high ionic conductivity and excellent interfacial compatibility.
Authors
- Hao He (ORCID: https://orcid.org/0000-0001-7070-3260)
- Zhendong Li (ORCID: https://orcid.org/0000-0002-1750-1050)
- Jia Wang
Institutions
- Jianghan University (CN)
- Zhengzhou University (CN)
Publication Details
- Journal
- ACS Applied Energy Materials
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1021/acsaem.6c01958
- Primary Topic
- Advanced Battery Materials and Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00