MODELING AND SIMULATION OF NONLINEAR JOINT BEHAVIOR IN INDUSTRIAL ASSEMBLIES USING HARMONIC BALANCE METHOD AND FINITE ELEMENT ANALYSIS

This paper proposes a computationally efficient framework for the simulation of nonlinear joint dynamics in complex industrial assemblies where friction-induced micro-motions have significant influences on system behavior. The proposed method combines FEA, Craig-Bampton sub-structuring, and the Jenkins friction model within an HBM solver enhanced by an AFT scheme. Sub-structuring was used to reduce the full FE model of the "Harmony" assembly from 1.2 million DOFs to 2,150 (a reduction of 99.8%) and succeeded in isolating the joint nonlinearities. The solution for nonlinear responses was obtained by HBM, while the path-following continuation method was employed to trace the amplitude-dependent behaviors. Results demonstrate excellent agreement with experiment: the model successfully predicted both a 15 Hz softening shift in the fundamental bending resonance for 50 N excitation, and approximated hysteresis loop areas within 4.9%; bifurcation and higher-harmonic generation were also captured. Most significantly, the simulation time was reduced from 72 hr in the full model to 2.1 hr in the ROM, affirming the applicability of the framework to fast, high-fidelity analysis of nonlinear industrial systems

Authors

Publication Details

Journal
Kufa Journal of Engineering
Published
2026-11-14
DOI
https://doi.org/10.30572/2018/kje/1704010
Primary Topic
Bladed Disk Vibration Dynamics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

MODELING AND SIMULATION OF NONLINEAR JOINT BEHAVIOR IN INDUSTRIAL ASSEMBLIES USING HARMONIC BALANCE METHOD AND FINITE ELEMENT ANALYSIS

Taha Hussein Karam Alsayyad
Kufa Journal of Engineering
Bladed Disk Vibration Dynamics
article

MODELING AND SIMULATION OF NONLINEAR JOINT BEHAVIOR IN INDUSTRIAL ASSEMBLIES USING HARMONIC BALANCE METHOD AND FINITE ELEMENT ANALYSIS

Taha Hussein Karam Alsayyad
article en

Abstract

This paper proposes a computationally efficient framework for the simulation of nonlinear joint dynamics in complex industrial assemblies where friction-induced micro-motions have significant influences on system behavior. The proposed method combines FEA, Craig-Bampton sub-structuring, and the Jenkins friction model within an HBM solver enhanced by an AFT scheme. Sub-structuring was used to reduce the full FE model of the "Harmony" assembly from 1.2 million DOFs to 2,150 (a reduction of 99.8%) and succeeded in isolating the joint nonlinearities. The solution for nonlinear responses was obtained by HBM, while the path-following continuation method was employed to trace the amplitude-dependent behaviors. Results demonstrate excellent agreement with experiment: the model successfully predicted both a 15 Hz softening shift in the fundamental bending resonance for 50 N excitation, and approximated hysteresis loop areas within 4.9%; bifurcation and higher-harmonic generation were also captured. Most significantly, the simulation time was reduced from 72 hr in the full model to 2.1 hr in the ROM, affirming the applicability of the framework to fast, high-fidelity analysis of nonlinear industrial systems

Kufa Journal of EngineeringVol. 17(4)
Bladed Disk Vibration Dynamics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon