Contrasting effects of core–shell rubber and fused silica fillers on rate-dependent peel performance and fracture behavior of epoxy adhesives

The effects of core–shell rubber (CSR) and fused silica fillers on the rate-dependent peel behavior and fracture characteristics of epoxy adhesives were investigated. Formulations based on diglycidyl ether of bisphenol A (DGEBA) cured with dicyandiamide (DICY) were prepared with filler contents of 10, 20, and 30 parts per hundred resin (phr) and characterized by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), T-peel testing, impact peel testing (ISO 11343), and scanning electron microscopy (SEM). CSR-modified formulations retained or enhanced peel performance under elevated-rate and impact loading, with impact peel strength increasing to 28.5 N/mm at 30 phr, a 3.6-fold improvement over the unfilled reference. In contrast, the silica-filled formulations did not improve upon the unfilled reference under impact loading; for the 10 phr formulation no stable crack-growth region developed, so an impact peel strength could not be determined. SEM observations showed rough, striation-rich fracture surfaces for the CSR-modified adhesives and void-like, more cleavage-like features for the silica-filled adhesives. The silica-filled formulations combined the higher storage modulus with the lower impact peel resistance, and both fillers gave comparable glass transition temperatures (Tg) at 30 phr, so that neither stiffness nor Tg accounts for the observed differences. The contrasting fracture morphologies are consistent with a greater contribution of energy-dissipative fracture processes in the CSR-modified system, although fracture energy was not measured directly. For the DGEBA/DICY system and loading conditions investigated, CSR modification was the more effective of the two approaches.

Authors

Institutions

Publication Details

Journal
Journal of Adhesion Science and Technology
Published
2026-11-14
DOI
https://doi.org/10.1080/01694243.2026.2758306
Primary Topic
Epoxy Resin Curing Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Contrasting effects of core–shell rubber and fused silica fillers on rate-dependent peel performance and fracture behavior of epoxy adhesives

Soong‐Keun Hyun, So-Jeong Lee, Jun-Ki Kim
Journal of Adhesion Science and Technology
Epoxy Resin Curing Processes
article

Contrasting effects of core–shell rubber and fused silica fillers on rate-dependent peel performance and fracture behavior of epoxy adhesives

Soong‐Keun Hyun, So-Jeong Lee, Jun-Ki Kim
article en

Abstract

The effects of core–shell rubber (CSR) and fused silica fillers on the rate-dependent peel behavior and fracture characteristics of epoxy adhesives were investigated. Formulations based on diglycidyl ether of bisphenol A (DGEBA) cured with dicyandiamide (DICY) were prepared with filler contents of 10, 20, and 30 parts per hundred resin (phr) and characterized by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), T-peel testing, impact peel testing (ISO 11343), and scanning electron microscopy (SEM). CSR-modified formulations retained or enhanced peel performance under elevated-rate and impact loading, with impact peel strength increasing to 28.5 N/mm at 30 phr, a 3.6-fold improvement over the unfilled reference. In contrast, the silica-filled formulations did not improve upon the unfilled reference under impact loading; for the 10 phr formulation no stable crack-growth region developed, so an impact peel strength could not be determined. SEM observations showed rough, striation-rich fracture surfaces for the CSR-modified adhesives and void-like, more cleavage-like features for the silica-filled adhesives. The silica-filled formulations combined the higher storage modulus with the lower impact peel resistance, and both fillers gave comparable glass transition temperatures (Tg) at 30 phr, so that neither stiffness nor Tg accounts for the observed differences. The contrasting fracture morphologies are consistent with a greater contribution of energy-dissipative fracture processes in the CSR-modified system, although fracture energy was not measured directly. For the DGEBA/DICY system and loading conditions investigated, CSR modification was the more effective of the two approaches.

Journal of Adhesion Science and Technology
Inha University (KR), Korea Institute of Industrial Technology (KR)
Epoxy Resin Curing Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon