Design Blueprint: Geothermal Absorption Cooling for a District Cold Network: Generator Heat, Cooling Coefficient and Heat-Rejection Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24234830): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: a lithium-bromide absorption chiller uses heat itself as its driving energy: geothermal water fires the generator that drives refrigerant around a cycle with no compressor, so a summer surplus of geothermal heat becomes chilled water — the waste product of every summer geothermal system turned into its product. The system is a single-effect absorption installation fired by 120 kilograms per second of geothermal water cooling from 96 to 78 degrees Celsius across the generator, evaporating at 5 degrees Celsius and rejecting heat at a condensing temperature of 35 degrees Celsius to a cooling circuit. The design target is the cooling capacity from the computed absorption coefficient of performance — a stated fraction of the three-temperature Carnot bound for absorption machines — together with the heat-rejection duty the cooling tower must carry. The cooling capacity is 5.69 megawatts at a coefficient of performance of 0.629 against a three-temperature Carnot bound of 1.34, from a generator duty of 9.05 megawatts, with a heat-rejection duty of 14.7 megawatts and an annual cooling delivery of 19.0 gigawatt-hours at the stated capacity factor. This work is a computed design study for civilian energy supply, with no targeting or weapon application. Its subject is the delivery of electricity or useful heat from geothermal resources, and its numbers are simulated from stated assumptions rather than measured on operating hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24235286
Primary Topic
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Geothermal Absorption Cooling for a District Cold Network: Generator Heat, Cooling Coefficient and Heat-Rejection Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
article

Design Blueprint: Geothermal Absorption Cooling for a District Cold Network: Generator Heat, Cooling Coefficient and Heat-Rejection Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24234830): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: a lithium-bromide absorption chiller uses heat itself as its driving energy: geothermal water fires the generator that drives refrigerant around a cycle with no compressor, so a summer surplus of geothermal heat becomes chilled water — the waste product of every summer geothermal system turned into its product. The system is a single-effect absorption installation fired by 120 kilograms per second of geothermal water cooling from 96 to 78 degrees Celsius across the generator, evaporating at 5 degrees Celsius and rejecting heat at a condensing temperature of 35 degrees Celsius to a cooling circuit. The design target is the cooling capacity from the computed absorption coefficient of performance — a stated fraction of the three-temperature Carnot bound for absorption machines — together with the heat-rejection duty the cooling tower must carry. The cooling capacity is 5.69 megawatts at a coefficient of performance of 0.629 against a three-temperature Carnot bound of 1.34, from a generator duty of 9.05 megawatts, with a heat-rejection duty of 14.7 megawatts and an annual cooling delivery of 19.0 gigawatt-hours at the stated capacity factor. This work is a computed design study for civilian energy supply, with no targeting or weapon application. Its subject is the delivery of electricity or useful heat from geothermal resources, and its numbers are simulated from stated assumptions rather than measured on operating hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon