Design Blueprint: Deployable Umbrella Drag-Modulation Aerocapture at Venus: Two-State Ballistic-Coefficient and Corridor Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24229730): This paper presents a computed design study of a planetary entry system on a single stated operating principle: a deployable umbrella-like drag skirt gives the spacecraft two discrete ballistic coefficients — skirt deployed for the deep, high-drag part of the pass and skirt jettisoned to raise the ballistic coefficient and exit — so the exit energy is controlled by the timing of a single jettison event rather than by continuous lift modulation. The system is a 980 kilogram Venus orbiter with a 7.0 metre deployable umbrella drag device, arriving with a hyperbolic excess speed of 3.40 kilometres per second and targeting a captured apoapsis altitude of 8,000 kilometres. The design target is capture at Venus, where the dense atmosphere and high arrival speed make a fixed-geometry corridor narrow, using the two-state drag change to widen the effective corridor. The design periapsis is 160 kilometres, the corridor is 3.75 kilometres wide, peak deceleration is 4.77 Earth gravities, peak heating is 65.9 watts per square centimetre, the heat load is 31.7 megajoules per square metre, and the thermal protection mass is 63.1 kilograms, a fraction 0.064 of the arrival mass. The purpose throughout is civilian planetary science: landing or orbiting instruments that measure another world's atmosphere, surface and environment. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian planetary-science atmospheric entry system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-14
DOI
https://doi.org/10.5281/zenodo.24230295
Primary Topic
Spacecraft Dynamics and Control
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Deployable Umbrella Drag-Modulation Aerocapture at Venus: Two-State Ballistic-Coefficient and Corridor Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Spacecraft Dynamics and Control
article

Design Blueprint: Deployable Umbrella Drag-Modulation Aerocapture at Venus: Two-State Ballistic-Coefficient and Corridor Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24229730): This paper presents a computed design study of a planetary entry system on a single stated operating principle: a deployable umbrella-like drag skirt gives the spacecraft two discrete ballistic coefficients — skirt deployed for the deep, high-drag part of the pass and skirt jettisoned to raise the ballistic coefficient and exit — so the exit energy is controlled by the timing of a single jettison event rather than by continuous lift modulation. The system is a 980 kilogram Venus orbiter with a 7.0 metre deployable umbrella drag device, arriving with a hyperbolic excess speed of 3.40 kilometres per second and targeting a captured apoapsis altitude of 8,000 kilometres. The design target is capture at Venus, where the dense atmosphere and high arrival speed make a fixed-geometry corridor narrow, using the two-state drag change to widen the effective corridor. The design periapsis is 160 kilometres, the corridor is 3.75 kilometres wide, peak deceleration is 4.77 Earth gravities, peak heating is 65.9 watts per square centimetre, the heat load is 31.7 megajoules per square metre, and the thermal protection mass is 63.1 kilograms, a fraction 0.064 of the arrival mass. The purpose throughout is civilian planetary science: landing or orbiting instruments that measure another world's atmosphere, surface and environment. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian planetary-science atmospheric entry system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Spacecraft Dynamics and Control
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon