Gluconic Acid Ligand Enables Rapid Chemical Bath Deposition of SnO 2 for High‐Efficiency Perovskite Solar Cells

ABSTRACT Chemical bath deposition (CBD) is widely used to prepare SnO 2 electron transport layers for high‐efficiency n‐i‐p perovskite solar cells. However, the conventional CBD recipe using thioglycolic acid (TGA) suffers from long deposition time, nanoparticle aggregation, energy level mismatch, abundant oxygen vacancy defects, and residual thiol. Herein, we report a green and rapid CBD strategy by completely replacing TGA with gluconic acid (GA). The abundant carboxyl and hydroxyl groups of GA regulate the deposition process: they suppress nanoparticle aggregation through hydrogen bonding and steric hindrance, enabling a dense and conformal SnO 2 film within 50 min; they also promote the full oxidation of Sn 2+ , reducing oxygen vacancy defects. The resulting GA‐SnO 2 promotes better energy level alignment with the perovskite film and improved interfacial charge transport. Moreover, GA inherently avoids thiol residues at the buried interface. The champion device (0.0729 cm 2 ) based on GA‐SnO 2 achieves a lab‐measured efficiency of 26.24%, retains 91.34% of its initial efficiency after 1000 h of maximum power point tracking, and a 5 cm × 5 cm mini‐module reaches 22.23% efficiency. This work provides a rapid, green, and scalable route to high‐quality SnO 2 electron transport layers.

Authors

Institutions

Publication Details

Journal
Small
Published
2026-11-13
DOI
https://doi.org/10.1002/smll.76738
Primary Topic
Perovskite Materials and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Gluconic Acid Ligand Enables Rapid Chemical Bath Deposition of SnO 2 for High‐Efficiency Perovskite Solar Cells

Penggang Yin, Weifeng Liu, Tingting You, Jinqing Lv et al.
Small
Perovskite Materials and Applications
article

Gluconic Acid Ligand Enables Rapid Chemical Bath Deposition of SnO 2 for High‐Efficiency Perovskite Solar Cells

Penggang Yin, Weifeng Liu, Tingting You, Jinqing Lv, Weiwei Sun, Zhifei Li, Yukun Gao, Zhiwen Dong
article en

Abstract

ABSTRACT Chemical bath deposition (CBD) is widely used to prepare SnO 2 electron transport layers for high‐efficiency n‐i‐p perovskite solar cells. However, the conventional CBD recipe using thioglycolic acid (TGA) suffers from long deposition time, nanoparticle aggregation, energy level mismatch, abundant oxygen vacancy defects, and residual thiol. Herein, we report a green and rapid CBD strategy by completely replacing TGA with gluconic acid (GA). The abundant carboxyl and hydroxyl groups of GA regulate the deposition process: they suppress nanoparticle aggregation through hydrogen bonding and steric hindrance, enabling a dense and conformal SnO 2 film within 50 min; they also promote the full oxidation of Sn 2+ , reducing oxygen vacancy defects. The resulting GA‐SnO 2 promotes better energy level alignment with the perovskite film and improved interfacial charge transport. Moreover, GA inherently avoids thiol residues at the buried interface. The champion device (0.0729 cm 2 ) based on GA‐SnO 2 achieves a lab‐measured efficiency of 26.24%, retains 91.34% of its initial efficiency after 1000 h of maximum power point tracking, and a 5 cm × 5 cm mini‐module reaches 22.23% efficiency. This work provides a rapid, green, and scalable route to high‐quality SnO 2 electron transport layers.

Small
Beihang University (CN)
Perovskite Materials and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon