Dynamic Spatial Programming of Active–Active Antagonistic Fiber Architectures for Enhanced Morphing

ABSTRACT Programming multiple deformation modes within a continuous liquid crystal elastomer (LCE) filament remains challenging because molecular alignment and active‐material distribution are typically coupled to the external printing path. Here, a rotational multimaterial printing strategy is introduced that encodes two co‐curable LCE phases with opposite free thermal strains within individual fibers. These antagonistic free strains act cooperatively after co‐curing to generate internal strain mismatch and structural deformation. A dual‐channel rotating nozzle co‐extrudes a thermally contracting nematic LCE and a thermally elongating smectic LCE, while nozzle angle, angular velocity, and flow‐rate ratio prescribe their cross‐sectional and axial distributions. Discrete and continuous rotation enable contraction, elongation, in‐plane bending, out‐of‐plane curling, and helical coiling without changing the filament centerline. Under matched conditions, the active–active fibers exhibit an approximately 1.6‐fold increase in curvature relative to the active–passive controls, while simultaneous co‐curing increases interfacial peel strength by approximately 30 times that achieved by sequential curing. The same encoding strategy extends from individual fibers to grids and Gaussian‐curvature surfaces and enables force‐generating strips, thermal protection, self‐sensing, particle sorting, and adaptive gripping. Rotational multimaterial printing therefore decouples intra‐filament architecture from toolpath geometry and provides a general route to spatially programmable active fibers.

Authors

Institutions

Publication Details

Journal
Advanced Materials
Published
2026-11-14
DOI
https://doi.org/10.1002/adma.75697
Primary Topic
Advanced Materials and Mechanics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Dynamic Spatial Programming of Active–Active Antagonistic Fiber Architectures for Enhanced Morphing

Shiwu Zhang, Weihua Li, Mujun Li, Boxi Sun et al.
Advanced Materials
Advanced Materials and Mechanics
article

Dynamic Spatial Programming of Active–Active Antagonistic Fiber Architectures for Enhanced Morphing

Shiwu Zhang, Weihua Li, Mujun Li, Boxi Sun, Xingxiang Li, Hao Jing, Hongbin Zang, Zhengchao Du, Yu Xiao, Yuxuan Sun, Yi Liu
article en

Abstract

ABSTRACT Programming multiple deformation modes within a continuous liquid crystal elastomer (LCE) filament remains challenging because molecular alignment and active‐material distribution are typically coupled to the external printing path. Here, a rotational multimaterial printing strategy is introduced that encodes two co‐curable LCE phases with opposite free thermal strains within individual fibers. These antagonistic free strains act cooperatively after co‐curing to generate internal strain mismatch and structural deformation. A dual‐channel rotating nozzle co‐extrudes a thermally contracting nematic LCE and a thermally elongating smectic LCE, while nozzle angle, angular velocity, and flow‐rate ratio prescribe their cross‐sectional and axial distributions. Discrete and continuous rotation enable contraction, elongation, in‐plane bending, out‐of‐plane curling, and helical coiling without changing the filament centerline. Under matched conditions, the active–active fibers exhibit an approximately 1.6‐fold increase in curvature relative to the active–passive controls, while simultaneous co‐curing increases interfacial peel strength by approximately 30 times that achieved by sequential curing. The same encoding strategy extends from individual fibers to grids and Gaussian‐curvature surfaces and enables force‐generating strips, thermal protection, self‐sensing, particle sorting, and adaptive gripping. Rotational multimaterial printing therefore decouples intra‐filament architecture from toolpath geometry and provides a general route to spatially programmable active fibers.

Advanced Materials
University of Science and Technology of China (CN), Southwest University of Science and Technology (CN), Hong Kong University of Science and Technology (HK), University of Wollongong (AU)
Advanced Materials and Mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon