SMART GRID-BASED SOLUTIONS TO PROTECTION SYSTEM CHALLENGES ARISING FROM PV INTEGRATION IN POWER NETWORKS
The presence of photovoltaic (PV) in the distribution network leads to inefficient protection devices that cannot detect the fault correctly because it changes the radial system to a bidirectional system; therefore, the need for an active protection scheme is necessary. This paper suggests an adaptive protection scheme that updates its settings automatically based on a communication link between PV units and the protection relays. The proposed scheme used ETAP software to simulate an 11 kV radial system with PV installation. The results show an important improvement where the scheme is able to detect and isolate the fault within 200 milliseconds. The miscoordination decreased by 35 % in comparison to conventional protection schemes, in addition to reliability enhancement without complex computation
Authors
- Zaid Alhadrawi (ORCID: https://orcid.org/0000-0001-9835-3522)
- Jinan Charafeddine
- Ameer Aqeel Kamoona
- Wafaa Shakir
- Ali Salah AlKhafaji
Publication Details
- Journal
- Kufa Journal of Engineering
- Published
- 2026-11-14
- DOI
- https://doi.org/10.30572/2018/kje/170415
- Primary Topic
- Power Systems Fault Detection
- Type
- article
- Field-Weighted Citation Impact
- 0.00