An Explicit Finite Element Framework for Computational Homogenization of Mechanical Metamaterials With Self‐Contact Across Periodic Cell Boundaries
ABSTRACT Self‐contact in mechanical metamaterials can reshape deformation modes, load‐transfer paths, and macroscopic stress‐strain responses. For periodic architectures, first‐order computational homogenization usually reduces the infinite material to a unit cell with periodic boundary conditions (PBCs). This reduction becomes incomplete when contact pairs cross periodic cell boundaries because PBCs enforce displacement compatibility without imposing the corresponding unilateral contact constraints, which may permit nonphysical interpenetration after periodic tiling and omit contact‐mediated load transfer between adjacent cells. To recover these interactions, the finite element domain is augmented with periodic copies of the reference cell. These periodic‐image cells are kinematically constrained copies that provide neighboring surfaces required for contact detection without introducing independent microscopic fluctuation fields. For explicit finite element analysis, the PBCs are implemented using distributed auxiliary key degrees of freedom (KDoFs) to alleviate the strong global coupling and associated loss of solution efficiency arising from a conventional centralized KDoF implementation. A homogeneous verification example recovers the analytical response for a unit cell whose periodic boundary is partitioned into kinematically continuous regions and initially closed contact regions. An IWP‐type triply periodic minimal‐surface metamaterial example shows that the conventional unit cell model with PBCs can miss boundary‐crossing contact activation and late‐stage stiffening, whereas the proposed periodic‐image self‐contact model captures both effects within first‐order computational homogenization.
Authors
- Rui Bao (ORCID: https://orcid.org/0000-0001-7170-082X)
- Shibo Yan (ORCID: https://orcid.org/0000-0003-2109-5515)
- Xi Yang Zou (ORCID: https://orcid.org/0000-0001-7436-7903)
- Yiding Li (ORCID: https://orcid.org/0000-0003-1722-6113)
- Junru Li (ORCID: https://orcid.org/0009-0006-0406-621X)
- Yun Tan
Institutions
- Swansea University (GB)
- Beihang University (CN)
Publication Details
- Journal
- International Journal for Numerical Methods in Engineering
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1002/nme.70467
- Primary Topic
- Composite Material Mechanics
- Type
- article
- Field-Weighted Citation Impact
- 0.00