Design Blueprint: A Nulling Interferometric Imager for Thermal-Infrared Planet Imaging: Null Depth, Baseline and Background Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225385): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: two collector apertures combine their beams with an achromatic half-wavelength phase shift so that the on-axis star interferes destructively at the output while a planet at a fringe maximum transmits, imaging the thermal emission of planets directly rather than their reflected light. The system is a formation-flying pair of 2.0 metre cryogenic collector telescopes with a beam-combiner spacecraft, baseline adjustable from 10 to 60 metres, budgeted at 25 metres, observing at 10 micrometres. The design target is an Earth-size planet at 1 astronomical unit around a Sun-like star 10 parsecs away, seen in thermal emission at 10 micrometres where its flux ratio to the star is near 1.0e-7. The resolution element is 1031 milliarcseconds; the inner working angle is 1031 milliarcseconds and the outer working angle 6188 milliarcseconds. The planet delivers 5.28e-1 detected photons per second against a total background and noise variance rate of 1.41e+2, dominated by read-noise variance, giving an exposure of 3.5 hours to reach signal-to-noise 5. The wavefront stability allocation of 9000 picometres rms corresponds to a contrast floor of 3.20e-5, and the adopted residual contrast is 2.00e-6. The purpose throughout is civilian astronomy: detecting and characterizing planets around nearby stars. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-14
DOI
https://doi.org/10.5281/zenodo.24225700
Primary Topic
Adaptive optics and wavefront sensing
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: A Nulling Interferometric Imager for Thermal-Infrared Planet Imaging: Null Depth, Baseline and Background Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
article

Design Blueprint: A Nulling Interferometric Imager for Thermal-Infrared Planet Imaging: Null Depth, Baseline and Background Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225385): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: two collector apertures combine their beams with an achromatic half-wavelength phase shift so that the on-axis star interferes destructively at the output while a planet at a fringe maximum transmits, imaging the thermal emission of planets directly rather than their reflected light. The system is a formation-flying pair of 2.0 metre cryogenic collector telescopes with a beam-combiner spacecraft, baseline adjustable from 10 to 60 metres, budgeted at 25 metres, observing at 10 micrometres. The design target is an Earth-size planet at 1 astronomical unit around a Sun-like star 10 parsecs away, seen in thermal emission at 10 micrometres where its flux ratio to the star is near 1.0e-7. The resolution element is 1031 milliarcseconds; the inner working angle is 1031 milliarcseconds and the outer working angle 6188 milliarcseconds. The planet delivers 5.28e-1 detected photons per second against a total background and noise variance rate of 1.41e+2, dominated by read-noise variance, giving an exposure of 3.5 hours to reach signal-to-noise 5. The wavefront stability allocation of 9000 picometres rms corresponds to a contrast floor of 3.20e-5, and the adopted residual contrast is 2.00e-6. The purpose throughout is civilian astronomy: detecting and characterizing planets around nearby stars. Nothing in the design is optimized for any other use, and the study has no targeting or weapon application. It is a computed study; every performance figure is simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon