Natural-gas spark-ignition conversion of a diesel-derived engine with a re-entrant combustion chamber: combustion stability, efficiency and diesel-load benchmarking
This study experimentally evaluates the spark-ignition conversion of a diesel-derived engine to natural-gas operation, with emphasis on combustion stability, efficiency, emissions, and diesel-load benchmarking. A Hyundai HR 2.5 L engine was modified for port-fuel-injected operation and tested in a single-cylinder configuration using two combustion systems, designated Stock (original diesel-derived bowl) and Modified (re-entrant bowl with a larger squish area and lower compression ratio). Tests included naturally aspirated throttled and dethrottled operation at 1800 rpm, boosted stoichiometric operation up to 17.8 bar IMEP, and diesel-load benchmark comparisons against an estimated single-cylinder indicated diesel reference at 1600, 1800, and 2000 rpm. Under dethrottled lean operation, the Modified configuration maintained shorter CA10-90 and lower COVIMEP near the dilution limit, preventing the marked deterioration in combustion efficiency and methane emissions observed with the Stock configuration, although NO X increased at moderately lean conditions. Under boost, the Modified configuration also reduced high-frequency pressure-oscillation energy throughout the evaluated load range. At approximately 15 bar IMEP and lambda 1.4, net indicated efficiency reached 42.6–42.8 %, remaining within the literature-based FMEP sensitivity range of the reconstructed diesel reference, whereas stoichiometric natural-gas operation remained about two percentage points lower. Lean benchmark operation reduced nominal direct CO 2 and NOX emissions but substantially increased methane slip; the resulting CO 2 -equivalent trend was comparatively sensitive to uncertainty in the reconstructed exhaust-flow calculation. Overall, the Modified configuration improved dilution tolerance and high-load combustion robustness, enabling diesel-comparable indicated load and efficiency while identifying methane-slip and NO X control as key requirements for high-efficiency methane applications.
Authors
- Roberto A. Garlet (ORCID: https://orcid.org/0000-0003-0975-0804)
- Jean Lucca Souza Fagundez (ORCID: https://orcid.org/0000-0001-5455-9027)
- Mario Eduardo Santos Martins (ORCID: https://orcid.org/0000-0002-4001-8243)
- Igor Rodrigues dos Santos (ORCID: https://orcid.org/0000-0001-5754-0612)
- T.D.M. Lanzanova
- C.D.R. da Silva
Institutions
- Universidade Federal do Rio Grande do Sul (BR)
- Universidade Federal de Santa Maria (BR)
Publication Details
- Journal
- Fuel
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1016/j.fuel.2026.142085
- Primary Topic
- Advanced Combustion Engine Technologies
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- Fundação de Amparo à Pesquisa do Estado do Rio Grande do Sul
- Fundação de Desenvolvimento da Pesquisa