Mechanical Properties of Corroded Q355 Structural Steel Considering Plate Thickness Effect
Abstract In this study, accelerated corrosion tests simulating marine atmospheric exposure were conducted on Q355 steel specimens of different thicknesses, and their mechanical property degradation was evaluated through uniaxial tensile testing. A quantitative relationship between mechanical property parameters and mass loss rate was established, enabling the prediction of mechanical property degradation of Q355 steel considering both plate thickness and time-varying corrosion effects. The results indicate that the specimen surface gradually lost its metallic luster during corrosion and developed dark yellow corrosion products. In the midstage of corrosion, pits deepen and interconnect along the plate thickness, whereas in the later stage of corrosion, large-scale corrosion pits form, resulting in pronounced variations in surface morphology. The necking phenomenon of the fracture of the specimens after corrosion damage was not obvious, and the tearing morphology at the fracture edge changed from prismatic to triangular pyramidal, leading to reduced ductility. Corrosion damage causes decreases in both yield strength and ultimate strength. This degradation was faster in thinner plates, whereas partial plasticity was preserved in thicker plates. The elastic modulus decreases approximately linearly with increasing mass loss rate, and elongation after fracture is highly sensitive to local corrosion damages. The absolute prediction error was less than 10%, indicating that the proposed predictive model can be used to describe the degradation law of mechanical properties of Q355 steel in marine corrosive environments.
Authors
- Huanhuan Wei (ORCID: https://orcid.org/0009-0009-0387-3441)
- Yao‐Peng Liu (ORCID: https://orcid.org/0000-0002-0856-5554)
- Chan Siulai
- Yao Chen
- Yiqun Tang
Institutions
- Jiangsu University of Science and Technology (CN)
- Southeast University (CN)
- South China University of Technology (CN)
Publication Details
- Journal
- Journal of Materials in Civil Engineering
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1061/jmcee7.mteng-24916
- Primary Topic
- Structural Integrity and Reliability Analysis
- Type
- article
- Field-Weighted Citation Impact
- 0.00