Combustion of Boron Nanoparticles Encapsulated within Perchlorate Matrices: A Mechanistic Study
Boron is an attractive high-energy fuel, but its practical combustion efficiency is limited by a viscous oxide layer that impedes oxygen transport and promotes agglomeration. Here, we address these limitations by assembling boron nanoparticles into spray-dried mesoparticles in which boron is encapsulated within an ammonium perchlorate (AP) matrix and a nitrocellulose binder. This architecture enhances fuel oxidizer proximity, accelerates AP decomposition onset by ∼60 °C, and enhances reaction kinetics as evidenced by a ∼50% pressurization rate and a ∼58% shorter burn time relative to the physically mixed formulation. In situ TEM, TGA/DSC, and T-jump time-of-flight mass spectrometry reveal that mesoparticles promote interfacial reactions producing both B2O3 and boron nitride (BN). BN formation is identified as a thermodynamic efficiency-loss pathway, releasing significantly less energy per mole of boron than oxidation to B2O3. Substituting AP with potassium perchlorate eliminates the nitrogen source, significantly reducing BN formation, and further improves combustion performance. These results demonstrate that mesoscale encapsulation combined with targeted oxidizer selection provides a practical strategy to enhance boron combustion efficiency.
Authors
- Mahbub Chowdhury (ORCID: https://orcid.org/0000-0003-2032-737X)
- Michael R. Zachariah (ORCID: https://orcid.org/0000-0002-4115-3324)
- Lei Yang (ORCID: https://orcid.org/0000-0002-1094-8642)
- Yuxin Zhou (ORCID: https://orcid.org/0009-0005-1397-3834)
- Sammed Bhalerao (ORCID: https://orcid.org/0009-0000-4792-6714)
Institutions
- University of California System (US)
Publication Details
- Journal
- ACS Applied Materials & Interfaces
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1021/acsami.6c13891
- Primary Topic
- Energetic Materials and Combustion
- Type
- article
- Field-Weighted Citation Impact
- 0.00