A Winged Lifting-Body Entry Vehicle at Mars: Hypersonic Lift-to-Drag, Cross-Range and Heating Budgets
This paper presents a computed design study of a planetary entry system on a single stated operating principle: a winged lifting body enters at a sustained angle of attack with a hypersonic lift-to-drag ratio near 1.2, converting part of its descent energy into cross-range and downrange control, so it can reach a prepared landing site from an off-nominal entry state that would carry a ballistic capsule far from any runway or surveyed terrain. The system is a 3,200 kilogram lifting-body vehicle with a 9.0 metre reference planform area, entering the Martian atmosphere at 5.60 kilometres per second with peak heating evaluated at a density of 0.0015 kilograms per cubic metre. The design target is delivery to a high-elevation Mars landing site with cross-range of the computed size, at peak heating and deceleration the hot structure and insulation are sized against. Peak deceleration is 5.08 Earth gravities, peak heating is 109 watts per square centimetre, the heat load is 95.9 megajoules per square metre, and the thermal protection mass is 246 kilograms, a fraction 0.077 of the entry mass. This is a computed study with a civilian planetary-science purpose and no targeting or weapon application. The system exists on paper to deliver scientific instruments to another world, and every budget in it — corridor, deceleration, heating, descent — is a planetary-science budget. All figures are simulated from the stated assumptions, not measured.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24229836
- Primary Topic
- Gas Dynamics and Kinetic Theory
- Type
- article
- Field-Weighted Citation Impact
- 0.00