Design Blueprint: Geothermal Greenhouse and Aquaculture Cascade: Heating-Load, Pond Heat-Loss and Cascaded Flow Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24235036): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: geothermal water at a temperature too low for power serves two food-production loads in cascade — greenhouse air and soil heating first, then warm-water aquaculture — because plants and fish are loads that want exactly the 20 to 40 degree heat that every other process in the energy system is trying to reject. The system is a supply at 68 degrees Celsius serving 22,000 square metres of greenhouse with a fabric-and-ventilation heat demand computed at a design temperature difference of 23 kelvin, soil heating at 25 watts per square metre, and a 1,800 cubic metre aquaculture installation exchanging a quarter of its volume daily into ponds held at 27 degrees Celsius, with reinjection at 30 degrees Celsius. The design target is the geothermal flow the combined loads require, built up load by load from the greenhouse envelope loss, the soil heating rate and the pond make-up heating duty, so each load's share of the well is visible. The combined loads require a geothermal flow of 28.4 kilograms per second delivering 4.53 megawatts of heat — 3.63 megawatts to greenhouse air, 550 kilowatts to soil heating and 349 kilowatts to aquaculture — and an annual delivery of 19.0 gigawatt-hours at the stated capacity factor. This work is a computed design study for civilian energy supply, with no targeting or weapon application. Its subject is the delivery of electricity or useful heat from geothermal resources, and its numbers are simulated from stated assumptions rather than measured on operating hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24235411
Primary Topic
Geothermal Energy Systems and Applications
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Geothermal Greenhouse and Aquaculture Cascade: Heating-Load, Pond Heat-Loss and Cascaded Flow Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Geothermal Energy Systems and Applications
article

Design Blueprint: Geothermal Greenhouse and Aquaculture Cascade: Heating-Load, Pond Heat-Loss and Cascaded Flow Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24235036): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: geothermal water at a temperature too low for power serves two food-production loads in cascade — greenhouse air and soil heating first, then warm-water aquaculture — because plants and fish are loads that want exactly the 20 to 40 degree heat that every other process in the energy system is trying to reject. The system is a supply at 68 degrees Celsius serving 22,000 square metres of greenhouse with a fabric-and-ventilation heat demand computed at a design temperature difference of 23 kelvin, soil heating at 25 watts per square metre, and a 1,800 cubic metre aquaculture installation exchanging a quarter of its volume daily into ponds held at 27 degrees Celsius, with reinjection at 30 degrees Celsius. The design target is the geothermal flow the combined loads require, built up load by load from the greenhouse envelope loss, the soil heating rate and the pond make-up heating duty, so each load's share of the well is visible. The combined loads require a geothermal flow of 28.4 kilograms per second delivering 4.53 megawatts of heat — 3.63 megawatts to greenhouse air, 550 kilowatts to soil heating and 349 kilowatts to aquaculture — and an annual delivery of 19.0 gigawatt-hours at the stated capacity factor. This work is a computed design study for civilian energy supply, with no targeting or weapon application. Its subject is the delivery of electricity or useful heat from geothermal resources, and its numbers are simulated from stated assumptions rather than measured on operating hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Geothermal Energy Systems and Applications
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon