An Ice-Shielded Subsurface Module at the Lunar Poles: Water Overburden, Thermal Balance and Power Budgets
This study sizes the system named in its title from stated physical relations and a stated operating basis, and reports the result as SIMULATED, NOT MEASURED. The operating principle is a habitat module buried under a layer of water ice, so the shielding material is also a stored resource and its phase-change behaviour buffers temperature swings. The system is a civilian polar research station for six people prospecting and studying lunar water ice; it carries mining test equipment, laboratories and stores. Every figure is computed by the deposited script from its inputs rather than asserted. At the design point the overburden pressure is 6.0 kilopascals, the dose at depth is 0.0194 millisieverts per day against 0.85 millisieverts per day at the surface, the excavated quantity is 499.0 cubic metres (459.0 tonnes), and the average power demand is 23.7 kilowatts with a steady heat loss of 6.28 kilowatts. Mass, power, thermal and construction budgets are assembled from components so they can be audited line by line, off-design behaviour is discussed openly, and the limits of the sizing are stated in full. The design is presented as a civilian system throughout, for use on the Moon, with its governing constraint identified and quantified rather than merely encountered.
Authors
- William Alexander Aldred (ORCID: https://orcid.org/0009-0000-1215-577X)
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-14
- DOI
- https://doi.org/10.5281/zenodo.24211095
- Primary Topic
- Planetary Science and Exploration
- Type
- article
- Field-Weighted Citation Impact
- 0.00