Influence of molecular sieve type on the liquid product of jet fuel from syngas
Bifunctional catalysts have received increasing attention for producing jet fuel in Fischer–Tropsch synthesis. However, there are few reports on the analysis of liquid products of jet fuel and the relationship between the structure and performance. Herein, Co/ZSM-5, Co/β, Co/Y, Co/Y1-AB, Co/Y2-AB, and Co/Y3-AB catalysts were synthesized using the melt penetration method. Co/ZSM-5, Co/β, and Co/Y catalysts were characterized by X-ray diffraction, scanning electron microscopy, and energy dispersion spectroscopy. Co/Y1-AB, Co/Y2-AB, and Co/Y3-AB catalysts were characterized by X-ray diffraction, Brunauer–Emmett–Teller, and pyridine-absorbed Fourier-transform infrared spectroscopy. The performance of these six catalysts for the one-step conversion of syngas into jet fuel was evaluated. The hydrocarbon number distribution, group composition, and sulfur content of the liquid products were analyzed. The results showed that all liquid products contained branched and cycloalkanes. In addition, the highest C8–C16 selectivity was obtained from the Co/Y2-AB catalyst with medium amount of Brønsted acid at 350 °C. The Co/Y2-AB catalyst is worthy of further study for one-step synthesis of jet fuel from syngas.
Authors
- Sun Xin-liang
- Hongliang Huo (ORCID: https://orcid.org/0009-0003-5520-0667)
- Rui Liu (ORCID: https://orcid.org/0000-0001-6353-6193)
- Hui-Min Yuan
- Zhuang Ma
- Zhi-Xiang Zhang
- Yu-Meng Qian
- Li-Li Ma
Institutions
- Beijing Institute of Petrochemical Technology (CN)
- Department of Chemicals and Petrochemicals (IN)
Publication Details
- Journal
- Journal of Coordination Chemistry
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1080/00958972.2026.2744274
- Primary Topic
- Catalysts for Methane Reforming
- Type
- article
- Field-Weighted Citation Impact
- 0.00