Design Blueprint: A Cryogenic Mid-Infrared Coronagraph Telescope: Thermal-Emission, Cooler and Contrast Budgets at Twelve Micrometres

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225261): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: the entire telescope and coronagraph are cooled to below 40 kelvin so that their own thermal emission at twelve micrometres falls under the zodiacal background, allowing a Lyot coronagraph to image the thermal emission of temperate planets against a background set by dust rather than by the instrument. The system is a 6.0 metre telescope passively cooled by a multi-layer sunshield and actively trimmed by mechanical cryocoolers to 38 kelvin, with a cold Lyot coronagraph and a mid-infrared array detector. The design target is a temperate super-Earth in thermal emission at 12 micrometres around a nearby M dwarf, where the planet-star flux ratio is near 1.0e-7 and the habitable zone sits at small angular separation. The resolution element is 413 milliarcseconds; the inner working angle is 1238 milliarcseconds and the outer working angle 4950 milliarcseconds. The planet delivers 2.09 detected photons per second against a total background and noise variance rate of 4.74e+3, dominated by exozodiacal and zodiacal background, giving an exposure of 7.5 hours to reach signal-to-noise 5. The wavefront stability allocation of 2600 picometres rms corresponds to a contrast floor of 1.85e-6, and the adopted residual contrast is 1.00e-6. This work is a computed design study for civilian astronomy, with no targeting or weapon application. Its subject is the measurement of faint planetary light beside bright stars, and its numbers are simulated from stated assumptions rather than measured on hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-14
DOI
https://doi.org/10.5281/zenodo.24225632
Primary Topic
Adaptive optics and wavefront sensing
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: A Cryogenic Mid-Infrared Coronagraph Telescope: Thermal-Emission, Cooler and Contrast Budgets at Twelve Micrometres

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
article

Design Blueprint: A Cryogenic Mid-Infrared Coronagraph Telescope: Thermal-Emission, Cooler and Contrast Budgets at Twelve Micrometres

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24225261): This paper presents a computed design study of a direct-imaging exoplanet observatory on a single stated operating principle: the entire telescope and coronagraph are cooled to below 40 kelvin so that their own thermal emission at twelve micrometres falls under the zodiacal background, allowing a Lyot coronagraph to image the thermal emission of temperate planets against a background set by dust rather than by the instrument. The system is a 6.0 metre telescope passively cooled by a multi-layer sunshield and actively trimmed by mechanical cryocoolers to 38 kelvin, with a cold Lyot coronagraph and a mid-infrared array detector. The design target is a temperate super-Earth in thermal emission at 12 micrometres around a nearby M dwarf, where the planet-star flux ratio is near 1.0e-7 and the habitable zone sits at small angular separation. The resolution element is 413 milliarcseconds; the inner working angle is 1238 milliarcseconds and the outer working angle 4950 milliarcseconds. The planet delivers 2.09 detected photons per second against a total background and noise variance rate of 4.74e+3, dominated by exozodiacal and zodiacal background, giving an exposure of 7.5 hours to reach signal-to-noise 5. The wavefront stability allocation of 2600 picometres rms corresponds to a contrast floor of 1.85e-6, and the adopted residual contrast is 1.00e-6. This work is a computed design study for civilian astronomy, with no targeting or weapon application. Its subject is the measurement of faint planetary light beside bright stars, and its numbers are simulated from stated assumptions rather than measured on hardware. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian direct-imaging exoplanet observatory system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Adaptive optics and wavefront sensing
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon