Design Blueprint: Supercritical Geothermal Power from a Deep High-Temperature Well: Turbine Enthalpy Drop, Efficiency and Materials-Temperature Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24235168): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: a well drilled into rock hot enough that the produced fluid is supercritical water — beyond 374 degrees Celsius and 22.1 megapascals, where liquid and gas cease to be distinct — carries roughly twice the enthalpy per kilogram of a conventional high-temperature resource, so a single well can deliver the energy of several ordinary wells if its materials survive the fluid. The system is one deep well producing 42 kilograms per second of supercritical fluid at a stated inlet enthalpy of 3,090 kilojoules per kilogram and entropy of 6.21 kilojoules per kilogram-kelvin, expanded to a condenser at 45 degrees Celsius, with the cooled fluid reinjected at 200 degrees Celsius equivalent enthalpy. The design target is net electrical output per well, and the net conversion efficiency against the produced enthalpy above reinjection, stated beside the Carnot bound for the same temperatures so the claim's distance from the limit is explicit. The net electrical output is 34.3 megawatts from a produced flow of 42.0 kilograms per second, a net conversion efficiency of 36.5 percent of the extracted thermal power of 94.0 megawatts, and an annual electricity production of 265 gigawatt-hours at the stated capacity factor. This is a computed study with a civilian energy purpose and no targeting or weapon application. The system exists on paper to supply electricity or useful heat to civilian users, and every budget in it — reservoir, flow, conversion, exchanger — is an energy budget. All figures are simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-15
DOI
https://doi.org/10.5281/zenodo.24235516
Primary Topic
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Supercritical Geothermal Power from a Deep High-Temperature Well: Turbine Enthalpy Drop, Efficiency and Materials-Temperature Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
article

Design Blueprint: Supercritical Geothermal Power from a Deep High-Temperature Well: Turbine Enthalpy Drop, Efficiency and Materials-Temperature Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24235168): This paper presents a computed design study of a geothermal energy system on a single stated operating principle: a well drilled into rock hot enough that the produced fluid is supercritical water — beyond 374 degrees Celsius and 22.1 megapascals, where liquid and gas cease to be distinct — carries roughly twice the enthalpy per kilogram of a conventional high-temperature resource, so a single well can deliver the energy of several ordinary wells if its materials survive the fluid. The system is one deep well producing 42 kilograms per second of supercritical fluid at a stated inlet enthalpy of 3,090 kilojoules per kilogram and entropy of 6.21 kilojoules per kilogram-kelvin, expanded to a condenser at 45 degrees Celsius, with the cooled fluid reinjected at 200 degrees Celsius equivalent enthalpy. The design target is net electrical output per well, and the net conversion efficiency against the produced enthalpy above reinjection, stated beside the Carnot bound for the same temperatures so the claim's distance from the limit is explicit. The net electrical output is 34.3 megawatts from a produced flow of 42.0 kilograms per second, a net conversion efficiency of 36.5 percent of the extracted thermal power of 94.0 megawatts, and an annual electricity production of 265 gigawatt-hours at the stated capacity factor. This is a computed study with a civilian energy purpose and no targeting or weapon application. The system exists on paper to supply electricity or useful heat to civilian users, and every budget in it — reservoir, flow, conversion, exchanger — is an energy budget. All figures are simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian geothermal energy system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Thermodynamic and Exergetic Analyses of Power and Cooling Systems
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon