Regioisomer-Controlled Biobased Benzoxazine Resin: Low-Temperature Curing, High Performance, and Intrinsic Flame Retardancy

Abstract The development of high-performance thermosetting resins that simultaneously combine low-temperature processability, thermal stability, flame retardancy, and favorable dielectric properties remains challenging. In this work, a biobased benzoxazine monomer, UA-Fa, was synthesized from Urolithin A and furfurylamine through a solvent-free strategy. The molecular structure of UA-Fa was systematically elucidated by spectroscopic characterization, including 1H-1H NOESY NMR analysis. Owing to its unique molecular architecture and multiple reactive sites, UA-Fa exhibited a low curing peak temperature of 203 °C, enabling low-temperature fabrication of the corresponding thermoset poly(UA-Fa). The cured resin exhibited a high glass transition temperature of 303 °C, together with excellent mechanical properties, including a tensile strength of 91.4 ± 4.7 MPa, a Young's modulus of 6.57 ± 0.27 GPa, and a hardness of 0.62 ± 0.02 GPa. Compared with the commercial resin poly(DBA-Pa), poly(UA-Fa) exhibited substantially improved thermal stability and flame retardancy, with its initial decomposition temperature and char yield reaching 404 °C and 73%, respectively, compared with 330 °C and 38% for poly(DBA-Pa). Moreover, the peak heat release rate and total heat release of poly(UA-Fa) were only 39.2 W/g and 4.3 kJ/g, corresponding to reductions of approximately 76 and 80%, respectively, relative to poly(DBA-Pa). In addition, poly(UA-Fa) exhibited a low dielectric constant of 2.77–2.51 over 100 Hz–2 MHz and maintained a dielectric constant below 3 from room temperature to 300 °C at 1 GHz. These results demonstrate that rational incorporation of a rigid biobased aromatic framework and multiple reactive sites provides an effective strategy for achieving the synergistic combination of low-temperature curing, thermal stability, flame retardancy, mechanical robustness, and low dielectric properties in benzoxazine thermosets.

Authors

Institutions

Publication Details

Journal
ACS Sustainable Chemistry & Engineering
Published
2026-11-14
DOI
https://doi.org/10.1021/acssuschemeng.6c10687
Primary Topic
Epoxy Resin Curing Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Regioisomer-Controlled Biobased Benzoxazine Resin: Low-Temperature Curing, High Performance, and Intrinsic Flame Retardancy

Xuechao Sha, Binbin Qian, Zhenyu Yang, Xiuzhi Yang et al.
ACS Sustainable Chemistry & Engineering
Epoxy Resin Curing Processes
article

Regioisomer-Controlled Biobased Benzoxazine Resin: Low-Temperature Curing, High Performance, and Intrinsic Flame Retardancy

Xuechao Sha, Binbin Qian, Zhenyu Yang, Xiuzhi Yang, Bingbing Yu, Zongtang Liu, Da-Liang Zhu, Zhenghao Fei, Yunying Pan
article en

Abstract

Abstract The development of high-performance thermosetting resins that simultaneously combine low-temperature processability, thermal stability, flame retardancy, and favorable dielectric properties remains challenging. In this work, a biobased benzoxazine monomer, UA-Fa, was synthesized from Urolithin A and furfurylamine through a solvent-free strategy. The molecular structure of UA-Fa was systematically elucidated by spectroscopic characterization, including 1H-1H NOESY NMR analysis. Owing to its unique molecular architecture and multiple reactive sites, UA-Fa exhibited a low curing peak temperature of 203 °C, enabling low-temperature fabrication of the corresponding thermoset poly(UA-Fa). The cured resin exhibited a high glass transition temperature of 303 °C, together with excellent mechanical properties, including a tensile strength of 91.4 ± 4.7 MPa, a Young's modulus of 6.57 ± 0.27 GPa, and a hardness of 0.62 ± 0.02 GPa. Compared with the commercial resin poly(DBA-Pa), poly(UA-Fa) exhibited substantially improved thermal stability and flame retardancy, with its initial decomposition temperature and char yield reaching 404 °C and 73%, respectively, compared with 330 °C and 38% for poly(DBA-Pa). Moreover, the peak heat release rate and total heat release of poly(UA-Fa) were only 39.2 W/g and 4.3 kJ/g, corresponding to reductions of approximately 76 and 80%, respectively, relative to poly(DBA-Pa). In addition, poly(UA-Fa) exhibited a low dielectric constant of 2.77–2.51 over 100 Hz–2 MHz and maintained a dielectric constant below 3 from room temperature to 300 °C at 1 GHz. These results demonstrate that rational incorporation of a rigid biobased aromatic framework and multiple reactive sites provides an effective strategy for achieving the synergistic combination of low-temperature curing, thermal stability, flame retardancy, mechanical robustness, and low dielectric properties in benzoxazine thermosets.

ACS Sustainable Chemistry & Engineering
Yancheng Teachers University (CN)
Epoxy Resin Curing Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon