Effect of in situ-generated TiB 2 reinforcements on mechanical, tribological and corrosion behaviour of functionally graded Al metal matrix composites
Functionally graded aluminium matrix composites reinforced with TiB 2 were produced through horizontal centrifugal casting. The TiB 2 phase was generated in situ by the reaction of K 2 TiF 6 and KBF 4 salts within the molten aluminium. Hollow cylindrical composites containing a fixed 7.5% of TiB 2 were cast at rotational speeds of 1000, 1100 and 1200 r/min. The effects of varying mould speeds on the mechanical, tribological and corrosion properties of Al–TiB 2 functionally graded composites were examined and compared to those of pure aluminium. The microhardness improved with the addition of TiB 2 reinforcement, with further increases observed at higher mould speeds. The composite fabricated at 1100 r/min exhibited superior tensile strength and wear performance, and it also showed the highest corrosion resistance compared to the other samples.
Authors
- Uppu Srinivas Rao (ORCID: https://orcid.org/0000-0002-2490-9222)
- Basudeb Rajak (ORCID: https://orcid.org/0009-0006-3020-7856)
- Rakesh Kumar Gautam (ORCID: https://orcid.org/0000-0001-5756-3830)
- Asgar Shakil
Institutions
- Indian Institute of Technology BHU (IN)
Publication Details
- Journal
- Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1177/09544089261507166
- Primary Topic
- Aluminum Alloys Composites Properties
- Type
- article
- Field-Weighted Citation Impact
- 0.00