Evaluation of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl) hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-Decahydroacridine] as a Corrosion Inhibitor for Mild Steel in an Acidic Medium

The corrosion-inhibition behaviour of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl)hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-decahydroacridine], an acridine-2,4-dinitrophenylhydrazone derivative, was evaluated for mild steel in hydrochloric acid using the gravimetric weight-loss method. Mild-steel coupons were polished, cleaned, weighed, and immersed in uninhibited acid and acid solutions containing selected inhibitor concentrations. Weight loss was recorded at three-day intervals over 30 days, and inhibition efficiency and surface coverage were calculated from the corrosion-rate data. The uninhibited system showed relatively stable weight loss throughout the exposure period, confirming the corrosive nature of the acid medium. The inhibitor reduced weight loss most effectively at 2 ppm, where inhibition efficiency remained between 72.73% and 75.13%. At 6 ppm, inhibition efficiency decreased to 29.27–33.71%, whereas at 10 ppm it decreased further to 14.99–17.34%. Surface-coverage values followed the same pattern, with the highest values at 2 ppm and lower values at the higher concentrations. These findings indicate that the tested compound reduced mild-steel corrosion under the experimental conditions, with the best performance at the lowest tested concentration. Nevertheless, the concentration-dependent decline in performance requires further investigation. Electrochemical measurements, adsorption-isotherm analysis, replicated experiments, and surface-characterisation studies are required to clarify the inhibition mechanism and confirm the reproducibility of the observed behaviour.

Authors

Institutions

Publication Details

Journal
Asian Journal of Applied Chemistry Research
Published
2026-11-14
DOI
https://doi.org/10.9734/ajacr/2026/v17i4438
Primary Topic
Corrosion Behavior and Inhibition
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Evaluation of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl) hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-Decahydroacridine] as a Corrosion Inhibitor for Mild Steel in an Acidic Medium

Godwin J. Udo, Aniedi E. Nyong, Joachim J. Awaka-Ama, Joshua Felix et al.
Asian Journal of Applied Chemistry Research
Corrosion Behavior and Inhibition
article

Evaluation of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl) hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-Decahydroacridine] as a Corrosion Inhibitor for Mild Steel in an Acidic Medium

Godwin J. Udo, Aniedi E. Nyong, Joachim J. Awaka-Ama, Joshua Felix, Kufre Edet Essien, Ibagha Isaac, Saviour Ekiko, Joseph Alexander, Clement Obadimu
article en

Abstract

The corrosion-inhibition behaviour of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl)hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-decahydroacridine], an acridine-2,4-dinitrophenylhydrazone derivative, was evaluated for mild steel in hydrochloric acid using the gravimetric weight-loss method. Mild-steel coupons were polished, cleaned, weighed, and immersed in uninhibited acid and acid solutions containing selected inhibitor concentrations. Weight loss was recorded at three-day intervals over 30 days, and inhibition efficiency and surface coverage were calculated from the corrosion-rate data. The uninhibited system showed relatively stable weight loss throughout the exposure period, confirming the corrosive nature of the acid medium. The inhibitor reduced weight loss most effectively at 2 ppm, where inhibition efficiency remained between 72.73% and 75.13%. At 6 ppm, inhibition efficiency decreased to 29.27–33.71%, whereas at 10 ppm it decreased further to 14.99–17.34%. Surface-coverage values followed the same pattern, with the highest values at 2 ppm and lower values at the higher concentrations. These findings indicate that the tested compound reduced mild-steel corrosion under the experimental conditions, with the best performance at the lowest tested concentration. Nevertheless, the concentration-dependent decline in performance requires further investigation. Electrochemical measurements, adsorption-isotherm analysis, replicated experiments, and surface-characterisation studies are required to clarify the inhibition mechanism and confirm the reproducibility of the observed behaviour.

Asian Journal of Applied Chemistry ResearchVol. 17(4)
Akwa Ibom State University (NG)
Corrosion Behavior and Inhibition
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon