Design Blueprint: Magnetoshell Aerocapture at Neptune: Plasma-Drag Effective Area, Corridor and Capture Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24229861): This paper presents a computed design study of a planetary entry system on a single stated operating principle: a superconducting coil aboard the spacecraft inflates a magnetic bubble in the hypersonic flow; the incoming neutral gas is ionized and deflected by the bubble, so drag acts over the magnetopause cross-section — tens of metres across — while most of the flow energy goes into the plasma rather than into a solid surface, and the effective drag area grows as the atmosphere thins. The system is a 1,600 kilogram Neptune orbiter carrying a coil of radius 2.0 metres producing a 0.50 tesla field at the coil, arriving with a hyperbolic excess speed of 8.50 kilometres per second and targeting a captured apoapsis altitude of 60,000 kilometres. The design target is capture at Neptune, where arrival speeds are the highest of any planet and a solid aeroshell of useful size would face severe heating, using plasma drag to obtain a large, self-adjusting capture area. The design periapsis is 1495 kilometres, the corridor is 49.2 kilometres wide, peak deceleration is 3.5 Earth gravities, peak heating is 14.4 watts per square centimetre, the heat load is 18.3 megajoules per square metre, and the thermal protection mass is 15.1 kilograms, a fraction 9.45e-3 of the arrival mass. This is a computed study with a civilian planetary-science purpose and no targeting or weapon application. The system exists on paper to deliver scientific instruments to another world, and every budget in it — corridor, deceleration, heating, descent — is a planetary-science budget. All figures are simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian planetary-science atmospheric entry system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-14
DOI
https://doi.org/10.5281/zenodo.24230399
Primary Topic
Spacecraft Dynamics and Control
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Design Blueprint: Magnetoshell Aerocapture at Neptune: Plasma-Drag Effective Area, Corridor and Capture Budgets

William Alexander Aldred
Zenodo (CERN European Organization for Nuclear Research)
Spacecraft Dynamics and Control
article

Design Blueprint: Magnetoshell Aerocapture at Neptune: Plasma-Drag Effective Area, Corridor and Capture Budgets

William Alexander Aldred
article en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24229861): This paper presents a computed design study of a planetary entry system on a single stated operating principle: a superconducting coil aboard the spacecraft inflates a magnetic bubble in the hypersonic flow; the incoming neutral gas is ionized and deflected by the bubble, so drag acts over the magnetopause cross-section — tens of metres across — while most of the flow energy goes into the plasma rather than into a solid surface, and the effective drag area grows as the atmosphere thins. The system is a 1,600 kilogram Neptune orbiter carrying a coil of radius 2.0 metres producing a 0.50 tesla field at the coil, arriving with a hyperbolic excess speed of 8.50 kilometres per second and targeting a captured apoapsis altitude of 60,000 kilometres. The design target is capture at Neptune, where arrival speeds are the highest of any planet and a solid aeroshell of useful size would face severe heating, using plasma drag to obtain a large, self-adjusting capture area. The design periapsis is 1495 kilometres, the corridor is 49.2 kilometres wide, peak deceleration is 3.5 Earth gravities, peak heating is 14.4 watts per square centimetre, the heat load is 18.3 megajoules per square metre, and the thermal protection mass is 15.1 kilograms, a fraction 9.45e-3 of the arrival mass. This is a computed study with a civilian planetary-science purpose and no targeting or weapon application. The system exists on paper to deliver scientific instruments to another world, and every budget in it — corridor, deceleration, heating, descent — is a planetary-science budget. All figures are simulated from the stated assumptions, not measured. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian planetary-science atmospheric entry system and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Spacecraft Dynamics and Control
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon