Compact Below-Cutoff Substrate Integrated Waveguide Bandpass Filters Based on Space-Filling I–H Slot Resonators
Operating a substrate integrated waveguide (SIW) only above the cutoff of its dominant mode leads to bulky filters in the low-gigahertz range. In this work, a space-filling I–H slot is etched on the upper wall of an SIW so that transmission is obtained inside the evanescent band of the guide. The slot acts as a magnetic-dipole resonator; together with the negative effective permittivity of the guide below cutoff, it creates a backward-wave band followed directly by a forward-wave band. Slots of first, second and third order are compared inside an identical footprint, the effective permittivity and permeability are extracted from the simulated scattering parameters, and a lumped-element model with analytical expressions for the lower transmission zero and both resonant modes is fitted to the full-wave response. For the third-order slot on FR4 (εᵣ = 4.3), the passband is located near 2.15 GHz, roughly 59% lower than the 5.2 GHz cutoff of the unloaded guide. A fabricated single-cell filter measures about 1.5 dB insertion loss including the SMA connectors, about 19 dB return loss, two transmission zeros and a board area of 17 × 17 mm² (0.12λ₀ × 0.12λ₀). Cascaded two- and three-cell designs with steeper skirts are also reported and compared with recent SIW fractal and metamaterial filters.
Authors
- Rand Muaffaq Hadi
Publication Details
- Journal
- Zenodo (CERN European Organization for Nuclear Research)
- Published
- 2026-11-13
- DOI
- https://doi.org/10.5281/zenodo.24200433
- Primary Topic
- Microwave Engineering and Waveguides
- Type
- article
- Field-Weighted Citation Impact
- 0.00