Toward RF Interconnection Computing: A Coupling-Matrix Perspective on Physical Signal Transformation in Transmission-Line Networks

This paper develops RF interconnection computing as a deliberately narrow architectural concept: a transmission network that is already required to route coherent radio-frequency signals is co-designed to perform a restricted linear transformation during propagation, rather than being treated as an electrically neutral connection followed by a separate computing block. The proposal does not claim that electromagnetic waves performing matrix operations are new. Coupling-matrix filter synthesis, passive beamforming and sum–difference networks, computational metamaterials, programmable wave-based computers, and recently demonstrated microwave matrix processors already establish that interference and multiport networks can realize linear transformations [1]–[15]. The open question addressed here is instead whether an interconnection itself can be treated as an application-specific operator and evaluated jointly for routing and computation. To place that concept on a physically consistent basis, the paper first separates input and output port groups in a reciprocal multiport network and defines the forward operator as the transmission submatrix H = S_OI, rather than identifying an entire scattering matrix with an input–output computation. A general temporal coupled-mode formulation is then connected to an idealized single-frequency bipartite coupling model. In this special model, a real target contraction W can be mapped analytically to a normalized coupling block G, while the complete 2N-port scattering matrix remains reciprocal and lossless. Three externally selected three-channel operators—through transmission, common-mode extraction, and differential-subspace projection—are used as reproducible numerical examples. The calculations expose both the opportunity and the limitation of the concept: useful modal transformations can be embedded algebraically in a passive interconnection, but rejected modal energy is reflected rather than destroyed, bandwidth and loss are absent from the ideal model, and abstract coupling coefficients are not yet a manufacturable transmission-line layout. The paper therefore frames RF interconnection computing as a falsifiable co-design hypothesis and specifies the electromagnetic, circuit, and system-level evidence required before claims of reduced hardware, latency, or data movement would be justified.

Authors

Publication Details

Journal
Preprints.org
Published
2026-11-13
DOI
https://doi.org/10.20944/preprints202611.1427.v1
Primary Topic
Microwave Engineering and Waveguides
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Toward RF Interconnection Computing: A Coupling-Matrix Perspective on Physical Signal Transformation in Transmission-Line Networks

최정식
1 links
Preprints.org
Microwave Engineering and Waveguides
preprint

Toward RF Interconnection Computing: A Coupling-Matrix Perspective on Physical Signal Transformation in Transmission-Line Networks

최정식
preprint en

Abstract

This paper develops RF interconnection computing as a deliberately narrow architectural concept: a transmission network that is already required to route coherent radio-frequency signals is co-designed to perform a restricted linear transformation during propagation, rather than being treated as an electrically neutral connection followed by a separate computing block. The proposal does not claim that electromagnetic waves performing matrix operations are new. Coupling-matrix filter synthesis, passive beamforming and sum–difference networks, computational metamaterials, programmable wave-based computers, and recently demonstrated microwave matrix processors already establish that interference and multiport networks can realize linear transformations [1]–[15]. The open question addressed here is instead whether an interconnection itself can be treated as an application-specific operator and evaluated jointly for routing and computation. To place that concept on a physically consistent basis, the paper first separates input and output port groups in a reciprocal multiport network and defines the forward operator as the transmission submatrix H = S_OI, rather than identifying an entire scattering matrix with an input–output computation. A general temporal coupled-mode formulation is then connected to an idealized single-frequency bipartite coupling model. In this special model, a real target contraction W can be mapped analytically to a normalized coupling block G, while the complete 2N-port scattering matrix remains reciprocal and lossless. Three externally selected three-channel operators—through transmission, common-mode extraction, and differential-subspace projection—are used as reproducible numerical examples. The calculations expose both the opportunity and the limitation of the concept: useful modal transformations can be embedded algebraically in a passive interconnection, but rejected modal energy is reflected rather than destroyed, bandwidth and loss are absent from the ideal model, and abstract coupling coefficients are not yet a manufacturable transmission-line layout. The paper therefore frames RF interconnection computing as a falsifiable co-design hypothesis and specifies the electromagnetic, circuit, and system-level evidence required before claims of reduced hardware, latency, or data movement would be justified.

Preprints.org
Microwave Engineering and Waveguides
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon