Comparative One-Step Activation of Zhundong Coal Using KOH and ZnCl2: Hierarchically Porous Adsorbents for Malachite Green Adsorption

Abstract Although abundant in reserves, Zhundong coal is prone to severe slagging when combusted due to its high sodium content. Converting this coal into functionally designed carbon materials offers a sustainable strategy for clean utilization. This study compared hierarchically porous adsorbents prepared from Zhundong coal by one-step activation with ZnCl2 or KOH (denoted as ZnCl2@coal and KOH@coal, respectively) in terms of their pore structures and malachite green (MG) adsorption behavior in model aqueous solutions. Characterization revealed increased carbon content (from 67% to approximately 83%), specific surface area (from 10 to 1210–1773 m2/g), and pore volume of up to 1.00 cm3/g in both ZnCl2@coal and KOH@coal relative to the raw Zhundong coal. Adsorption experiments demonstrated that both adsorbents removed MG over the investigated pH range (2–9) and KCl concentrations (0–1000 mmol/L). The adsorption kinetics were well described by the pseudo-second-order model, whereas the Langmuir model fitted the equilibrium data better than the Freundlich model. Thermodynamic analysis indicated favorable MG adsorption under the adopted standard-state treatment and suggested a possible endothermic trend. At 308 K, the highest measured MG adsorption capacity of ZnCl2@coal was 5252.7 mg/g at an initial concentration of 6000 mg/L, while the Langmuir-derived maximum capacity was 8522.5 mg/g. Its higher MG uptake relative to KOH@coal at high initial concentrations was associated with a greater mesopore surface area and larger average pore width (2.77 nm versus 2.25 nm), although differences in surface chemistry and residual inorganic species may also contribute. This study provides a comparative assessment of KOH and ZnCl2 activation for converting low-grade Zhundong coal into porous adsorbents, highlighting the differences in the resulting materials’ physicochemical properties and MG adsorption behavior.

Authors

Institutions

Publication Details

Journal
ACS Omega
Published
2026-11-13
DOI
https://doi.org/10.1021/acsomega.6c06758
Primary Topic
Adsorption and biosorption for pollutant removal
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparative One-Step Activation of Zhundong Coal Using KOH and ZnCl2: Hierarchically Porous Adsorbents for Malachite Green Adsorption

Zhao PeiTao, Lin Zhang, Chao Feng, Yan Sun et al.
ACS Omega
Adsorption and biosorption for pollutant removal
article

Comparative One-Step Activation of Zhundong Coal Using KOH and ZnCl2: Hierarchically Porous Adsorbents for Malachite Green Adsorption

Zhao PeiTao, Lin Zhang, Chao Feng, Yan Sun, Jing Zhang
article en

Abstract

Abstract Although abundant in reserves, Zhundong coal is prone to severe slagging when combusted due to its high sodium content. Converting this coal into functionally designed carbon materials offers a sustainable strategy for clean utilization. This study compared hierarchically porous adsorbents prepared from Zhundong coal by one-step activation with ZnCl2 or KOH (denoted as ZnCl2@coal and KOH@coal, respectively) in terms of their pore structures and malachite green (MG) adsorption behavior in model aqueous solutions. Characterization revealed increased carbon content (from 67% to approximately 83%), specific surface area (from 10 to 1210–1773 m2/g), and pore volume of up to 1.00 cm3/g in both ZnCl2@coal and KOH@coal relative to the raw Zhundong coal. Adsorption experiments demonstrated that both adsorbents removed MG over the investigated pH range (2–9) and KCl concentrations (0–1000 mmol/L). The adsorption kinetics were well described by the pseudo-second-order model, whereas the Langmuir model fitted the equilibrium data better than the Freundlich model. Thermodynamic analysis indicated favorable MG adsorption under the adopted standard-state treatment and suggested a possible endothermic trend. At 308 K, the highest measured MG adsorption capacity of ZnCl2@coal was 5252.7 mg/g at an initial concentration of 6000 mg/L, while the Langmuir-derived maximum capacity was 8522.5 mg/g. Its higher MG uptake relative to KOH@coal at high initial concentrations was associated with a greater mesopore surface area and larger average pore width (2.77 nm versus 2.25 nm), although differences in surface chemistry and residual inorganic species may also contribute. This study provides a comparative assessment of KOH and ZnCl2 activation for converting low-grade Zhundong coal into porous adsorbents, highlighting the differences in the resulting materials’ physicochemical properties and MG adsorption behavior.

ACS Omega
China University of Mining and Technology (CN), Huazhong University of Science and Technology (CN)
Responsible consumption and production, Climate action
Adsorption and biosorption for pollutant removal
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon