Electrothermally assisted extrusion and curing for supportless fabrication of continuous carbon fibre thermoset composites

Additive manufacturing enables the programmable placement of continuous carbon fibres, but integrating thermoset curing directly into the printing process remains challenging. We report an electrothermally assisted extrusion and curing (ETEC) method for supportless fabrication of continuous carbon fibre-reinforced thermoset composites. ETEC uses braided continuous carbon fibre as both the reinforcement and the resistive heater during coaxial extrusion of a thermoset resin. Joule heating within the continuous carbon fibre promotes resin spreading and capillary infiltration, while continued heating promotes crosslinking and stabilises the deposited filament. No external heaters or photoinitiators are needed. At a linear power density of 52.6 W m−1, the braided continuous carbon fibre reaches 175 °C within 15 s, and a stationary-droplet experiment shows resin uptake by the heated braid within approximately 6 s. The method enables continuous out-of-plane deposition from a supporting substrate and between spatially separated points. The printed composite filaments reach a fibre volume fraction of 57.8%. Compared with filaments printed without heating, processing at 175 °C nearly doubles the apparent interfacial strength, to 69.44 MPa, and increases the tensile strength 2.2-fold, to 753.51 MPa. ETEC thus enables supportless printing of high-fibre-content thermoset composites.

Authors

Publication Details

Journal
Figshare
Published
2026-11-13
DOI
https://doi.org/10.6084/m9.figshare.35002547
Primary Topic
Additive Manufacturing and 3D Printing Technologies
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Electrothermally assisted extrusion and curing for supportless fabrication of continuous carbon fibre thermoset composites

Chee Kai Chua, Aqi Dong, Zefu Ren, Sirish Namilae et al.
4 links
Figshare
Additive Manufacturing and 3D Printing Technologies
article

Electrothermally assisted extrusion and curing for supportless fabrication of continuous carbon fibre thermoset composites

Chee Kai Chua, Aqi Dong, Zefu Ren, Sirish Namilae, Sida Xu, Meng Cheng, Alexander Skoppe, Zhuoyuan Yang, Daewon Kim, Yizhou Jiang
article en

Abstract

Additive manufacturing enables the programmable placement of continuous carbon fibres, but integrating thermoset curing directly into the printing process remains challenging. We report an electrothermally assisted extrusion and curing (ETEC) method for supportless fabrication of continuous carbon fibre-reinforced thermoset composites. ETEC uses braided continuous carbon fibre as both the reinforcement and the resistive heater during coaxial extrusion of a thermoset resin. Joule heating within the continuous carbon fibre promotes resin spreading and capillary infiltration, while continued heating promotes crosslinking and stabilises the deposited filament. No external heaters or photoinitiators are needed. At a linear power density of 52.6 W m−1, the braided continuous carbon fibre reaches 175 °C within 15 s, and a stationary-droplet experiment shows resin uptake by the heated braid within approximately 6 s. The method enables continuous out-of-plane deposition from a supporting substrate and between spatially separated points. The printed composite filaments reach a fibre volume fraction of 57.8%. Compared with filaments printed without heating, processing at 175 °C nearly doubles the apparent interfacial strength, to 69.44 MPa, and increases the tensile strength 2.2-fold, to 753.51 MPa. ETEC thus enables supportless printing of high-fibre-content thermoset composites.

Figshare
Industry, innovation and infrastructure
Additive Manufacturing and 3D Printing Technologies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon