Seismic Design of Steel Panel Dampers and Boundary Beams for Moment Resisting Frames

ABSTRACT The proposed three‐segment steel panel damper (SPD) consists of a middle inelastic core (IC) and two end elastic joint (EJ) wide‐flange sections. During earthquakes, the two EJs are designed to remain elastic, while the IC undergoes large inelastic shear deformation, thereby dissipating seismic energy. To sustain large deformation and delay shear buckling of the IC web, stiffeners must be properly devised. This study adopts an optimization algorithm to proportion the SPDs and boundary beams to achieve the minimum steel weight design. The objective function is the total weight of the SPD, boundary beam, and panel zone. The design variables are the sectional properties of the SPD and boundary beam, and the doubler plate thickness. Constraints include the capacity design of the SPD, boundary beam and panel zone, the stiffeners of the IC web, compact section and lateral torsional buckling limit state design requirements. The “basic design” represents the lightest sections satisfying all constraints. The lateral stiffness of the two SPDs‐to‐boundary beam subassembly can be enhanced by increasing the stiffness of either the SPDs or the boundary beam. As examples, the optimization designs of increasing 50% more stiffness of the subassemblies as the new constraint were conducted also. The stiffness of the subassemblies was enhanced most effectively by increasing the beam depths and web thicknesses. Beam depth, beam strength, and doubler plate thickness are recommended to be constrained during the optimization process to achieve a practical and economical design.

Authors

Institutions

Publication Details

Journal
Earthquake Engineering & Structural Dynamics
Published
2026-11-13
DOI
https://doi.org/10.1002/eqe.70327
Primary Topic
Seismic Performance and Analysis
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Seismic Design of Steel Panel Dampers and Boundary Beams for Moment Resisting Frames

Keh‐Chyuan Tsai, Ming‐Chieh Chuang, An‐Chien Wu, Hsi‐Yueh Shen et al.
Earthquake Engineering & Structural Dynamics
Seismic Performance and Analysis
article

Seismic Design of Steel Panel Dampers and Boundary Beams for Moment Resisting Frames

Keh‐Chyuan Tsai, Ming‐Chieh Chuang, An‐Chien Wu, Hsi‐Yueh Shen, Chu‐Hung Chang
article en

Abstract

ABSTRACT The proposed three‐segment steel panel damper (SPD) consists of a middle inelastic core (IC) and two end elastic joint (EJ) wide‐flange sections. During earthquakes, the two EJs are designed to remain elastic, while the IC undergoes large inelastic shear deformation, thereby dissipating seismic energy. To sustain large deformation and delay shear buckling of the IC web, stiffeners must be properly devised. This study adopts an optimization algorithm to proportion the SPDs and boundary beams to achieve the minimum steel weight design. The objective function is the total weight of the SPD, boundary beam, and panel zone. The design variables are the sectional properties of the SPD and boundary beam, and the doubler plate thickness. Constraints include the capacity design of the SPD, boundary beam and panel zone, the stiffeners of the IC web, compact section and lateral torsional buckling limit state design requirements. The “basic design” represents the lightest sections satisfying all constraints. The lateral stiffness of the two SPDs‐to‐boundary beam subassembly can be enhanced by increasing the stiffness of either the SPDs or the boundary beam. As examples, the optimization designs of increasing 50% more stiffness of the subassemblies as the new constraint were conducted also. The stiffness of the subassemblies was enhanced most effectively by increasing the beam depths and web thicknesses. Beam depth, beam strength, and doubler plate thickness are recommended to be constrained during the optimization process to achieve a practical and economical design.

Earthquake Engineering & Structural Dynamics
National Center for Research on Earthquake Engineering (TW), National Taiwan University (TW)
National Science and Technology Council
Industry, innovation and infrastructure
Seismic Performance and Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon