Anisotropic mechanical behavior and oxidation-induced microstructural evolution of Si₃N₄/CNT-graphene hybrid composites
In this study, the effect of Si₃N₄ powder oxidation on the microstructural characteristics and mechanical performance of Si₃N₄/CNT–graphene hybrid composites was investigated using a multiscale approach combining mechanical testing and microstructural characterization. Oxidation resulted in only minor variations in the measured densities, whereas the mechanical properties exhibited a non-monotonic response. Short-term oxidation (10 h) was associated with reduced indentation hardness and modulus, while prolonged oxidation (20 h) resulted in their recovery, particularly on the side surface. Flexural strength increased modestly with oxidation duration. Nanoindentation revealed surface-dependent mechanical behavior, with the side surfaces generally exhibiting higher indentation resistance, consistent with the observed morphology and apparent orientation of elongated β-Si₃N₄ grains. SEM and XRD analyses indicated that the overall grain framework and crystalline phase composition remained essentially unchanged, while surface-dependent differences in grain morphology and relative XRD peak intensities were consistent with preferential grain orientation. HAADF-STEM/EDS analyses revealed an increase in the measured oxygen content, from 10.79 to 16.01 at%, accompanied by broadly comparable spatial distributions of the principal elements, consistent with changes involving the oxygen-containing intergranular regions. These intergranular changes are relevant to grain-boundary interactions, while surface-dependent grain orientation contributes to the observed mechanical anisotropy, although the underlying mechanisms remain to be fully established. These findings provide insights into the structure–property relationships of Si₃N₄/CNT–graphene hybrid composites and highlight the importance of controlling powder oxidation and intergranular phase evolution to tailor their mechanical performance.
Authors
- Tamás Kolonits (ORCID: https://orcid.org/0000-0002-5836-4398)
- Csaba Balázsi (ORCID: https://orcid.org/0000-0003-4219-8783)
- Zsolt Czigány (ORCID: https://orcid.org/0000-0001-6410-8801)
- Alaa Almansoori (ORCID: https://orcid.org/0000-0002-9757-7724)
- Katalin Balázsi (ORCID: https://orcid.org/0000-0002-8929-9672)
Institutions
- Institute for Technical Physics and Materials Science (HU)
- Southern Technical University (IQ)
- HUN-REN Centre for Energy Research (HU)
Publication Details
- Journal
- Next Materials
- Published
- 2026-11-14
- DOI
- https://doi.org/10.1016/j.nxmate.2026.104056
- Primary Topic
- Advanced ceramic materials synthesis
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Hungarian Scientific Research Fund
- Nemzeti Kutatási Fejlesztési és Innovációs Hivatal