Coupled dynamics modeling and stick-slip suppression of a torque-balanced drilling tool driven by series counter-rotating screw motors
Excessive drill-string torque and stick-slip vibration severely restrict the safety and efficiency of deep and directional drilling. This paper proposes a torque-balanced drilling tool driven by positive- and reverse-hand screw motors in series, with a buffer airbag innovatively integrated in the middle of the series flow path. A torsional-hydraulic coupled dynamic model containing three rotating subsystems is established by the lumped-parameter method, and a nonlinear rate-weakening bit-rock interaction model is introduced. Modal analysis, frequency-domain analysis and time-domain simulations under step and impulse disturbances are carried out. The results show that the residual drill-string torque is reduced by 66.7% in steady state; the system without airbag has three dominant oscillation modes (1.76, 3.02 and 20.50 Hz); the inner bit is the most disturbance-sensitive component, with a step overshoot of 8.62% and a stick-slip limit cycle under low-speed conditions, while the outer bit remains stable. After introducing the airbag (compliance 5 × 10-8 m³/Pa), the impulse pressure-drop spike is attenuated by 51%, the residual speed oscillation by about 82%, and the stick-slip limit-cycle amplitude by more than 96%. The proposed tool provides a new technical approach for downhole torque balancing and vibration suppression in deep wells.
Authors
- Honggang He (ORCID: https://orcid.org/0000-0001-8513-5403)
- Yao He
- Xin Huang (ORCID: https://orcid.org/0009-0006-3336-3571)
- Wenjun Chen (ORCID: https://orcid.org/0000-0002-5858-8578)
- Jie Deng
- Wei Guo
- Li Liu
- Hua Shi
Institutions
- Yibin University (CN)
Publication Details
- Journal
- PLoS ONE
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1371/journal.pone.0361858
- Primary Topic
- Drilling and Well Engineering
- Type
- article
- Field-Weighted Citation Impact
- 0.00
Funders
- Yibin University