Enhancing PLA Crystallinity and Thermal Stability through Esparto Microfiber Reinforcement: Implications for Sustainable 3D Printing
Abstract Natural fiber reinforcement offers a route to control polymer crystallization and improve the processability of sustainable materials for additive manufacturing. This study introduces a processing-dependent assessment of PLA reinforced with 1 wt% Esparto microfibers, focusing on thermal stability, crystallization behavior, and potential for fused deposition modeling (FDM). Thermogravimetric analysis showed that the fibers remain thermally stable up to approximately 200°C, with major degradation occurring between 225 and 350°C. Esparto addition increased PLA crystallinity from 28.9% to 36.7%, reduced the cold-crystallization temperature from 121.82°C to 115.41°C, and raised the melting temperature from 159.81°C to 167.12°C, indicating enhanced heterogeneous nucleation. Melt spinning reduced composite crystallinity to 25.3%, demonstrating the influence of processing on polymer structure. Despite this reduction, the composite retained the crystallization benefits of Esparto reinforcement relative to spun PLA. These results establish a link between natural fiber-induced nucleation and processing-dependent thermal behavior, demonstrating the potential of low-content Esparto reinforcement for developing renewable PLA filaments. The findings provide a basis for optimizing processing conditions and advancing Esparto/PLA composites for sustainable FDM applications.
Authors
- Abderraouf GHERISSI
Institutions
- University of Tabuk (SA)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11569724/v1
- Primary Topic
- Natural Fiber Reinforced Composites
- Type
- preprint