Experimental Investigation into Slow Steaming Impacts on Hydrodynamic Journal Bearing for Sustainable Marine Propulsion
Abstract Slow steaming maneuverability is by all means one of the foremost operational techniques carried out for conquering the ship energy reduction ever-increasing demands. Inevitably necessitating reducing shaft speed, the recommended approach is unfortunately most likely to jeopardize hydrodynamic lubrication and hence intrinsic marine propulsion systems all alike. Committed by the criteria set by marine diesel engine loading program, the present experimental analysis has involved imposing variations in speed ranges and thus load impacts examining variable lubricant grades. Apparently, the prevalent transition was recorded from 93 down to 70 rpm, where maximum oil film pressure maintained permanent degradation tendency. Notably, lighter lubricant grades are more sensitive to the loss of speed induced entrainment, whereas elevated viscosity takes a considerable share in pressure preservation specifically at slow speed operating conditions. Further, slow steaming effective implementation ought to be assessed based on the performance of all intrinsic operational factors working together and not depending merely on speed as a sole evaluation reference. Considering tested conditions, the transition of 0W20 oil grade near 79 rpm sets test trial speed ranges from 93 down to 80 rpm as a conservative common hydrodynamic operating range and no merely a universal safety boundary. Technically speaking and given the actual operating conditions onboard ships, all potential influential operating and environmental impacts ought never to be taken for granted in case slow steaming evaluation is to be carried out both optimally and adequately.
Authors
- Renwei Ji (ORCID: https://orcid.org/0000-0003-1260-850X)
- Nour Marey (ORCID: https://orcid.org/0000-0003-4959-6506)
Institutions
- Jiangsu University of Science and Technology (CN)
- Arab Academy for Science, Technology, and Maritime Transport (EG)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-11460241/v1
- Primary Topic
- Tribology and Lubrication Engineering
- Type
- preprint