Metrology-Oriented Source-Point Sampling for Feature Continuity in Industrial Laser-Scanned Point Clouds
Abstract Industrial laser scans are frequently reduced before geometric inspection, registration, and pose estimation. Such reduction can preserve broad surface coverage while interrupting the source-point sequences that support the estimation of hole rims, slots, interface edges, and related functional features. This paper presents a metrology-oriented source-point sampling method for industrial laser-scanned point clouds. The method assigns retention priorities to acquired points through a topology-guided protection field that combines local feature evidence, propagation along connected boundary segments, association across separated fragments, and attenuation outside feature regions. The selected cloud therefore remains a subset of the measured coordinates, rather than a set of generated replacements. The method was evaluated on ABC-derived workpieces, a controlled standard gauge, and high-voltage battery connector scans using reconstruction-oriented error, feature retention, edge-continuity dispersion, ablation tests, transfer without target fine-tuning, and a pose-oriented connector case study. At a 25% sampling rate, connector scans achieved 99.6% normalized feature recall and an edge-continuity dispersion of 0.0008. The pose case study reported a mean angular error of 3.77 degrees for three evaluated connector features. The results show that continuity-aware source-point selection can retain measurement-relevant boundary evidence under data reduction for the evaluated industrial scans.
Authors
- Yilin Tao (ORCID: https://orcid.org/0009-0001-9982-1495)
- Haiying Wen (ORCID: https://orcid.org/0000-0001-7096-7581)
- Yibo Zhang (ORCID: https://orcid.org/0000-0002-0643-987X)
- Zhangchenlong Huang (ORCID: https://orcid.org/0009-0009-4629-6410)
- Zhijie Xia (ORCID: https://orcid.org/0000-0001-6946-8937)
- Jia FANG
- Zhisheng Zhang
Institutions
- University of the West of England (GB)
- Southeast University (CN)
Publication Details
- Journal
- Research Square
- Published
- 2026-11-13
- DOI
- https://doi.org/10.21203/rs.3.rs-10574997/v1
- Primary Topic
- Advanced Measurement and Metrology Techniques
- Type
- preprint
Funders
- Chongqing University
- State Key Laboratory of Mechanical Transmissions
- Jiangsu Provincial Key Research and Development Program