Design Blueprint: An Inflatable and Ultraviolet-Rigidised Shell System for Orbital Workshops: Gas, Curing and Surface-Area Budgets

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24185069): This paper presents a computed design study, SIMULATED, NOT MEASURED, for a rigid workshop shell 8 metres in diameter for housing production equipment in orbit, using glass-fibre laminate impregnated with ultraviolet-curing resin, packed flat. The operating principle is distinct from neighbouring production methods: a folded laminate shell is inflated with a small gas charge to its working shape and then exposed, panel by panel, to concentrated solar ultraviolet, which polymerises the resin and converts the soft shell into a rigid structure. Launch volume is a fraction of the deployed volume, which is the entire point. The budgets that decide feasibility are the inflation gas mass, the ultraviolet dose per unit area and the time the Sun geometry allows for curing. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 0.0667 megajoules per kilogram of product, an installed electrical power of 1.1 kilowatts, a production rate of 10.9 kilograms per hour, and an annual throughput of 8.63e+04 kilograms over 330 operating days. Rejecting 0.605 kilowatts of waste heat at 305 kelvin requires 1.4 square metres of radiator, a photovoltaic supply requires 2.69 square metres of array, and the installed mass is 217 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Authors

Publication Details

Journal
Zenodo (CERN European Organization for Nuclear Research)
Published
2026-11-13
DOI
https://doi.org/10.5281/zenodo.24185729
Primary Topic
Structural Analysis and Optimization
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Design Blueprint: An Inflatable and Ultraviolet-Rigidised Shell System for Orbital Workshops: Gas, Curing and Surface-Area Budgets

William Alexander Aldred
7 links
Zenodo (CERN European Organization for Nuclear Research)
Structural Analysis and Optimization
preprint

Design Blueprint: An Inflatable and Ultraviolet-Rigidised Shell System for Orbital Workshops: Gas, Curing and Surface-Area Budgets

William Alexander Aldred
preprint en

Abstract

Design blueprint derived from the source paper (DOI 10.5281/zenodo.24185069): This paper presents a computed design study, SIMULATED, NOT MEASURED, for a rigid workshop shell 8 metres in diameter for housing production equipment in orbit, using glass-fibre laminate impregnated with ultraviolet-curing resin, packed flat. The operating principle is distinct from neighbouring production methods: a folded laminate shell is inflated with a small gas charge to its working shape and then exposed, panel by panel, to concentrated solar ultraviolet, which polymerises the resin and converts the soft shell into a rigid structure. Launch volume is a fraction of the deployed volume, which is the entire point. The budgets that decide feasibility are the inflation gas mass, the ultraviolet dose per unit area and the time the Sun geometry allows for curing. Sizing follows from budgets computed in the accompanying script rather than from analogy with terrestrial equipment. The headline figures are a specific energy of 0.0667 megajoules per kilogram of product, an installed electrical power of 1.1 kilowatts, a production rate of 10.9 kilograms per hour, and an annual throughput of 8.63e+04 kilograms over 330 operating days. Rejecting 0.605 kilowatts of waste heat at 305 kelvin requires 1.4 square metres of radiator, a photovoltaic supply requires 2.69 square metres of array, and the installed mass is 217 kilograms. Moving feedstock from a 400 kilometre to an 800 kilometre orbit costs 217 metres per second of velocity change. The study is a computed study with no targeting or weapon application; it concerns civilian production equipment only, and none of its figures is a measurement. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.

Zenodo (CERN European Organization for Nuclear Research)
Industry, innovation and infrastructure, Responsible consumption and production
Structural Analysis and Optimization
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon