A comparative study for evaluation of surface alterations after machining of AISI H13 steel under dry and cryogenic conditions
AISI H13 tool steel is extensively utilised in moulding sector; however, its hard machining poses numerous challenges due to the considerable thermal and mechanical stresses that can modify the material’s mechanical properties. Attaining optimal surface characteristics during hard machining of AISI H13 is essential for improving the performance of the final product. Recently, the use of liquid nitrogen in machining processes has garnered interest because of its environmentally sustainable properties. Although there is a scarcity of comprehensive studies in the literature concerning surface modifications during the cryogenic turning of AISI H13, the present research conducts a comparative analysis of cryogenic and dry machining of this steel. The study examined various parameters of surface alteration, including white layer thickness, microhardness, and overall surface quality. The results of this comparison are well-supported by scientific explanations to enhance the understanding of the machining process. Cryogenic machining led to increased surface hardness and a reduction in white layer thickness, signifying an overall enhancement in surface quality when compared to dry machining conditions. For example, an increase in the depth of cut resulted in a 223% rise in white layer thickness under dry conditions, whereas only a 46% increase was observed under cryogenic conditions.
Authors
- Farshid Jafarian (ORCID: https://orcid.org/0000-0002-5017-8945)
- Mohammad Malekan (ORCID: https://orcid.org/0000-0003-1493-4720)
Institutions
- University of Southern Denmark (DK)
- Mahallat Institute of Higher Education (IR)
Publication Details
- Journal
- Advances in Materials and Processing Technologies
- Published
- 2026-11-13
- DOI
- https://doi.org/10.1080/2374068x.2026.2764089
- Primary Topic
- Advanced machining processes and optimization
- Type
- article
- Field-Weighted Citation Impact
- 0.00