3D‑printed modified power ridges for optimized torque control of maxillary incisors in clear aligner treatment: a finite element analysis

Abstract Background This study aimed to evaluate the effects of 3D‑printed modified power ridges on tooth movement and stress distribution when maxillary central incisors were torqued 1° with a clear aligner using finite element analysis (FEA). Methodology Based on the morphometry of the power ridge on the maxillary central incisors, three FEA groups were established: (1) the control group; (2) the power ridge group (a local indentation on the aligner surface); and (3) the modified power ridge group (localized aligner thickening). Power ridge heights of 0.1, 0.2, 0.25, 0.3, 0.4, and 0.5 mm were designed. Tooth displacement and periodontal ligament stress distribution under a simulated 1° palatal root torque were analyzed for each group. Results When 1° torque was applied, the maxillary central incisor tended to exhibit labial inclination. As the height increased from 0.1 mm to 0.25 mm, the rotation center progressively moved occlusally in both the power ridge and modified power ridge groups, with a more pronounced effect in the latter. When the height reached 0.3 mm, both the crown and the root demonstrated palatal movement accompanied by a tendency toward intrusion. Periodontal stress was concentrated in the apical area and labial cervical area. A stress concentration in the mesial cervical area was observed when the height reached 0.4 mm and 0.5 mm. Conclusions Compared with the conventional power ridge, the modified power ridge demonstrated better efficacy for root torque control at the same height, with the 0.25 mm design being identified as the relatively favorable configuration among the tested heights in this single-patient simulation.

Authors

Institutions

Publication Details

Journal
BMC Oral Health
Published
2026-11-13
DOI
https://doi.org/10.1186/s12903-026-10369-4
Primary Topic
Orthodontics and Dentofacial Orthopedics
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

3D‑printed modified power ridges for optimized torque control of maxillary incisors in clear aligner treatment: a finite element analysis

Jingke Gu, Yuchen Zheng, Yoshiya Hashimoto, Shuyan Liu et al.
6 links
BMC Oral Health
Orthodontics and Dentofacial Orthopedics
article

3D‑printed modified power ridges for optimized torque control of maxillary incisors in clear aligner treatment: a finite element analysis

Jingke Gu, Yuchen Zheng, Yoshiya Hashimoto, Shuyan Liu, Yaya Hong
article en

Abstract

Abstract Background This study aimed to evaluate the effects of 3D‑printed modified power ridges on tooth movement and stress distribution when maxillary central incisors were torqued 1° with a clear aligner using finite element analysis (FEA). Methodology Based on the morphometry of the power ridge on the maxillary central incisors, three FEA groups were established: (1) the control group; (2) the power ridge group (a local indentation on the aligner surface); and (3) the modified power ridge group (localized aligner thickening). Power ridge heights of 0.1, 0.2, 0.25, 0.3, 0.4, and 0.5 mm were designed. Tooth displacement and periodontal ligament stress distribution under a simulated 1° palatal root torque were analyzed for each group. Results When 1° torque was applied, the maxillary central incisor tended to exhibit labial inclination. As the height increased from 0.1 mm to 0.25 mm, the rotation center progressively moved occlusally in both the power ridge and modified power ridge groups, with a more pronounced effect in the latter. When the height reached 0.3 mm, both the crown and the root demonstrated palatal movement accompanied by a tendency toward intrusion. Periodontal stress was concentrated in the apical area and labial cervical area. A stress concentration in the mesial cervical area was observed when the height reached 0.4 mm and 0.5 mm. Conclusions Compared with the conventional power ridge, the modified power ridge demonstrated better efficacy for root torque control at the same height, with the 0.25 mm design being identified as the relatively favorable configuration among the tested heights in this single-patient simulation.

BMC Oral Health
Zhejiang Provincial People's Hospital (CN), Hangzhou Medical College (CN), Osaka Dental University (JP)
Good health and well-being
Orthodontics and Dentofacial Orthopedics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon