Simulator-recovery assessment of a physics-informed hybrid framework for tire wear rate estimation from telematics data

Route-level tire wear estimation from telematics data could support non-exhaust-emission assessment and sustainability-oriented navigation, but navigation-derived features do not directly observe the tire–road contact variables that control material removal. This paper presents a methodological simulator-recovery framework—not a validated predictive model—that links navigation-app features to an Archard-type tire wear simulator. The framework’s main contribution is a transparent input taxonomy that separates deployable quantities (available at inference) from oracle quantities (available only to the synthetic label generator), together with a dimensionally consistent Archard formulation, a per-tire normal-force model with longitudinal, lateral, and grade load transfer, a saturated slip-ratio model with low-speed correction, and a differentiable physics layer trained with an algebraic Archard ratio-consistency loss. On 150 synthetic routes (3588 telematics segments), pure kinematic data-driven models perform poorly (Random Forest: R 2 = 0 . 09 ; Gradient Boosting: R 2 = 0 . 00 ) because route-specific wear-coefficient variation is intentionally unobserved. Upper-bound reference diagnostics that use label-generation physics information reach much higher apparent accuracy: Hybrid Physics+RF reaches R 2 = 0 . 97 and MAE = 4.47 mg/km, while the physics-only reference reaches R 2 = 0 . 98 . These values should be interpreted strictly as simulator-recovery upper bounds, not as evidence of real-world predictive capability or deployable tire-wear prediction. A sensitivity analysis identifies the wear coefficient K as the dominant source of simulator variability (a consistent 490% range across the manuscript), highlighting tire-parameter calibration as the central deployment barrier. A loss-weight sensitivity analysis, a cross-vehicle transferability diagnostic, and an explicit discussion of deployable versus oracle quantities are provided to clarify the scope and limits of the framework. The study is positioned as a methodological starting point for future machine-learning work with measured telematics and tire-wear data.

Authors

Institutions

Publication Details

Journal
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Published
2026-11-13
DOI
https://doi.org/10.1177/09544070261486406
Primary Topic
Vehicle emissions and performance
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Simulator-recovery assessment of a physics-informed hybrid framework for tire wear rate estimation from telematics data

Masoud Masih‐Tehrani
2 links
Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Vehicle emissions and performance
article

Simulator-recovery assessment of a physics-informed hybrid framework for tire wear rate estimation from telematics data

Masoud Masih‐Tehrani
article en

Abstract

Route-level tire wear estimation from telematics data could support non-exhaust-emission assessment and sustainability-oriented navigation, but navigation-derived features do not directly observe the tire–road contact variables that control material removal. This paper presents a methodological simulator-recovery framework—not a validated predictive model—that links navigation-app features to an Archard-type tire wear simulator. The framework’s main contribution is a transparent input taxonomy that separates deployable quantities (available at inference) from oracle quantities (available only to the synthetic label generator), together with a dimensionally consistent Archard formulation, a per-tire normal-force model with longitudinal, lateral, and grade load transfer, a saturated slip-ratio model with low-speed correction, and a differentiable physics layer trained with an algebraic Archard ratio-consistency loss. On 150 synthetic routes (3588 telematics segments), pure kinematic data-driven models perform poorly (Random Forest: R 2 = 0 . 09 ; Gradient Boosting: R 2 = 0 . 00 ) because route-specific wear-coefficient variation is intentionally unobserved. Upper-bound reference diagnostics that use label-generation physics information reach much higher apparent accuracy: Hybrid Physics+RF reaches R 2 = 0 . 97 and MAE = 4.47 mg/km, while the physics-only reference reaches R 2 = 0 . 98 . These values should be interpreted strictly as simulator-recovery upper bounds, not as evidence of real-world predictive capability or deployable tire-wear prediction. A sensitivity analysis identifies the wear coefficient K as the dominant source of simulator variability (a consistent 490% range across the manuscript), highlighting tire-parameter calibration as the central deployment barrier. A loss-weight sensitivity analysis, a cross-vehicle transferability diagnostic, and an explicit discussion of deployable versus oracle quantities are provided to clarify the scope and limits of the framework. The study is positioned as a methodological starting point for future machine-learning work with measured telematics and tire-wear data.

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering
Iran University of Science and Technology (IR)
Industry, innovation and infrastructure
Vehicle emissions and performance
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon