Tailoring selective laser melting parameters of CoCrFeMnNi high-entropy alloys through volume energy density optimization

In this study, equiatomic CoCrFeMnNi high-entropy alloys (HEAs) were fabricated by selective laser melting (SLM) to investigate the effects of volumetric energy density (VED) on densification behavior, microstructural evolution, and mechanical properties. Three processing conditions were employed using laser powers of 300, 350, and 400 W and scanning speeds of 400, 430, and 460 mm/s, respectively, while the hatch spacing and layer thickness were fixed at 0.12 and 0.03 mm, corresponding to VED values of 208, 226, and 242 J/mm 3 . The microstructures were characterized by optical microscopy (OM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM), and the mechanical properties were evaluated by room-temperature tensile tests. All samples exhibited a single FCC structure with characteristic columnar/equiaxed grains and dislocation-rich substructures. With increasing VED, the relative density and tensile properties first increased and then decreased. The sample fabricated at 226 J/mm 3 exhibited the highest relative density of 99.11 ± 0.56% and the best tensile performance, with an ultimate tensile strength of 733 ± 1.2 MPa, a yield strength of 608 ± 2.8 MPa, and an elongation of 18.1%. The superior mechanical properties at this condition were associated with reduced processing defects, grain refinement, and enhanced dislocation strengthening. These results demonstrate that appropriate optimization of VED can effectively regulate the forming quality, microstructure, and mechanical properties of SLM-fabricated CoCrFeMnNi HEAs.

Authors

Institutions

Publication Details

Journal
Scientific Reports
Published
2026-11-13
DOI
https://doi.org/10.1038/s41598-026-79554-3
Primary Topic
High Entropy Alloys Studies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Tailoring selective laser melting parameters of CoCrFeMnNi high-entropy alloys through volume energy density optimization

Juangang Zhao, Xiaoyan Yang, Yafen Xu, Zhezheng Ren et al.
Scientific Reports
High Entropy Alloys Studies
article

Tailoring selective laser melting parameters of CoCrFeMnNi high-entropy alloys through volume energy density optimization

Juangang Zhao, Xiaoyan Yang, Yafen Xu, Zhezheng Ren, Jing Wu, Yu Liu, Qian Ma, Ruizhi Zhang
article en

Abstract

In this study, equiatomic CoCrFeMnNi high-entropy alloys (HEAs) were fabricated by selective laser melting (SLM) to investigate the effects of volumetric energy density (VED) on densification behavior, microstructural evolution, and mechanical properties. Three processing conditions were employed using laser powers of 300, 350, and 400 W and scanning speeds of 400, 430, and 460 mm/s, respectively, while the hatch spacing and layer thickness were fixed at 0.12 and 0.03 mm, corresponding to VED values of 208, 226, and 242 J/mm 3 . The microstructures were characterized by optical microscopy (OM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM), and the mechanical properties were evaluated by room-temperature tensile tests. All samples exhibited a single FCC structure with characteristic columnar/equiaxed grains and dislocation-rich substructures. With increasing VED, the relative density and tensile properties first increased and then decreased. The sample fabricated at 226 J/mm 3 exhibited the highest relative density of 99.11 ± 0.56% and the best tensile performance, with an ultimate tensile strength of 733 ± 1.2 MPa, a yield strength of 608 ± 2.8 MPa, and an elongation of 18.1%. The superior mechanical properties at this condition were associated with reduced processing defects, grain refinement, and enhanced dislocation strengthening. These results demonstrate that appropriate optimization of VED can effectively regulate the forming quality, microstructure, and mechanical properties of SLM-fabricated CoCrFeMnNi HEAs.

Scientific Reports
Central South University (CN), Lanzhou University of Technology (CN), Hunan Institute of Technology (CN)
National Natural Science Foundation of China
High Entropy Alloys Studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon