Comparative investigation of phase formation in Ti–Zr–Cu alloying processes via laser powder-bed fusion and plasma arc melting

Abstract This study presents a comparative analysis of phase formation in a Ti 38 Zr 27 Cu 35 alloy produced via Laser Powder-Bed Fusion (L-PBF) and Plasma Arc Melting (PAM). The investigation evaluates phase constituents, microstructure, elemental distribution, phase formation, and hardness using L-PBF specimens fabricated from in-situ elemental powders and PAM specimens as a reference for the conventional process. Analysis was conducted through FESEM for microstructure, XRD for phase identification, EPMA for chemical quantification, including chemical composition in identified phases, and Vickers testing for hardness. Results indicate that rapid solidification of L-PBF suppressed the predicted primary β -Ti phase, yielding a two-phase microstructure consisting of (Ti, Zr) 2 Cu dendrite and TiZrCu 2 intermetallic phase at the interdendritic. This non-equilibrium state demonstrated reduced lattice parameters and fine-grained structure. In contrast, the slower cooling rate in PAM, at approximately 2–3 orders of magnitude of that of L-PBF, allowed the formation of β phase (Ti-enriched equiaxed dendrites), resulting in β + (Ti, Zr) 2 Cu + TiZrCu 2 three-phase structure consistent with Scheil calculations. Consequently, the L-PBF specimens exhibited higher hardness than PAM. While both methods achieved elemental homogenization, their distinct alloying characteristic and cooling rates resulted in divergent morphological features, phase composition, and mechanical properties, fundamentally influencing the manufacturing.

Authors

Institutions

Publication Details

Journal
Materials Testing
Published
2026-11-13
DOI
https://doi.org/10.1515/mt-2026-0273
Primary Topic
Additive Manufacturing Materials and Processes
Type
article
Field-Weighted Citation Impact
0.00
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Comparative investigation of phase formation in Ti–Zr–Cu alloying processes via laser powder-bed fusion and plasma arc melting

Boonrat Lohwongwatana, Florian Hengsbach, Gregory B. Olson, Chedtha Puncreobutr et al.
4 links
Materials Testing
Additive Manufacturing Materials and Processes
article

Comparative investigation of phase formation in Ti–Zr–Cu alloying processes via laser powder-bed fusion and plasma arc melting

Boonrat Lohwongwatana, Florian Hengsbach, Gregory B. Olson, Chedtha Puncreobutr, Thanawat Phetrattanarangsi, Atchara Khamkongkaeo, Pattarapong Wannapraphai
article en

Abstract

Abstract This study presents a comparative analysis of phase formation in a Ti 38 Zr 27 Cu 35 alloy produced via Laser Powder-Bed Fusion (L-PBF) and Plasma Arc Melting (PAM). The investigation evaluates phase constituents, microstructure, elemental distribution, phase formation, and hardness using L-PBF specimens fabricated from in-situ elemental powders and PAM specimens as a reference for the conventional process. Analysis was conducted through FESEM for microstructure, XRD for phase identification, EPMA for chemical quantification, including chemical composition in identified phases, and Vickers testing for hardness. Results indicate that rapid solidification of L-PBF suppressed the predicted primary β -Ti phase, yielding a two-phase microstructure consisting of (Ti, Zr) 2 Cu dendrite and TiZrCu 2 intermetallic phase at the interdendritic. This non-equilibrium state demonstrated reduced lattice parameters and fine-grained structure. In contrast, the slower cooling rate in PAM, at approximately 2–3 orders of magnitude of that of L-PBF, allowed the formation of β phase (Ti-enriched equiaxed dendrites), resulting in β + (Ti, Zr) 2 Cu + TiZrCu 2 three-phase structure consistent with Scheil calculations. Consequently, the L-PBF specimens exhibited higher hardness than PAM. While both methods achieved elemental homogenization, their distinct alloying characteristic and cooling rates resulted in divergent morphological features, phase composition, and mechanical properties, fundamentally influencing the manufacturing.

Materials Testing
Chulalongkorn University (TH), Paderborn University (DE), Massachusetts Institute of Technology (US)
Additive Manufacturing Materials and Processes
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon