Organic–Inorganic Stabilization of Expansive Tuff Spoil for Cement-Stabilized Pavement Bases: Laboratory Characterization and Field Validation

Moisture-sensitive expansive tuff spoil is difficult to utilize directly in cement-stabilized pavement bases because of its susceptibility to water-induced deformation and associated mechanical and volumetric instability. This study developed an organic–inorganic stabilization system based on sodium silicate nonahydrate (Na2SiO3·9H2O) and cationic polyacrylamide (CPAM) and established a staged screening–validation framework combining swelling, mechanical, shrinkage, microstructural, and field evaluations. Within the tested range, the formulation containing 5.0% Na2SiO3·9H2O and 0.5% CPAM reduced the free swelling rate from 5.0% to 0.517%, corresponding to an 89.7% reduction. At 28 d, the mean unconfined compressive strength (UCS), splitting tensile strength (STS), and compressive resilient modulus were 15.61%, 27.0%, and 7.9% higher, respectively, than those of the cement-stabilized control. After Holm adjustment, STS showed statistically significant improvements at all tested curing ages, whereas UCS differed significantly only at 14 d, and compressive resilient modulus showed no statistically significant differences. The 90-d cumulative drying shrinkage strain (CDSS) decreased by 37.8%, while the thermal shrinkage coefficient (TSC) remained lower than that of the control over the tested temperature range. XRD and SEM–EDS analyses indicated that the dominant crystalline phases remained essentially unchanged, while qualitative SEM observations revealed a more compact interparticle morphology and fewer visible macropores in the modified material. These observations suggest possible contributions from improved interparticle bonding and interfacial regulation to the overall performance improvement. A 267-m full-scale expressway test section constructed using double-layer continuous paving achieved upper- and lower-layer compaction degrees of 98.6% and 98.4%, respectively, an average 7-d field UCS of 5.16 MPa, and a surface-evenness acceptance rate above 96%. These results support the feasibility of utilizing moisture-sensitive tuff spoil in cement-stabilized pavement bases under the tested laboratory and field conditions, providing evidence of its constructability and satisfactory early-age performance.

Authors

Institutions

Publication Details

Journal
Materials
Published
2026-11-13
DOI
https://doi.org/10.3390/ma19224825
Primary Topic
Geotechnical and construction materials studies
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Organic–Inorganic Stabilization of Expansive Tuff Spoil for Cement-Stabilized Pavement Bases: Laboratory Characterization and Field Validation

Henggen Zhang, Junwei Bi, Shen Zuo, Long Ma et al.
5 links
Materials
Geotechnical and construction materials studies
article

Organic–Inorganic Stabilization of Expansive Tuff Spoil for Cement-Stabilized Pavement Bases: Laboratory Characterization and Field Validation

Henggen Zhang, Junwei Bi, Shen Zuo, Long Ma, Jin Li
article en

Abstract

Moisture-sensitive expansive tuff spoil is difficult to utilize directly in cement-stabilized pavement bases because of its susceptibility to water-induced deformation and associated mechanical and volumetric instability. This study developed an organic–inorganic stabilization system based on sodium silicate nonahydrate (Na2SiO3·9H2O) and cationic polyacrylamide (CPAM) and established a staged screening–validation framework combining swelling, mechanical, shrinkage, microstructural, and field evaluations. Within the tested range, the formulation containing 5.0% Na2SiO3·9H2O and 0.5% CPAM reduced the free swelling rate from 5.0% to 0.517%, corresponding to an 89.7% reduction. At 28 d, the mean unconfined compressive strength (UCS), splitting tensile strength (STS), and compressive resilient modulus were 15.61%, 27.0%, and 7.9% higher, respectively, than those of the cement-stabilized control. After Holm adjustment, STS showed statistically significant improvements at all tested curing ages, whereas UCS differed significantly only at 14 d, and compressive resilient modulus showed no statistically significant differences. The 90-d cumulative drying shrinkage strain (CDSS) decreased by 37.8%, while the thermal shrinkage coefficient (TSC) remained lower than that of the control over the tested temperature range. XRD and SEM–EDS analyses indicated that the dominant crystalline phases remained essentially unchanged, while qualitative SEM observations revealed a more compact interparticle morphology and fewer visible macropores in the modified material. These observations suggest possible contributions from improved interparticle bonding and interfacial regulation to the overall performance improvement. A 267-m full-scale expressway test section constructed using double-layer continuous paving achieved upper- and lower-layer compaction degrees of 98.6% and 98.4%, respectively, an average 7-d field UCS of 5.16 MPa, and a surface-evenness acceptance rate above 96%. These results support the feasibility of utilizing moisture-sensitive tuff spoil in cement-stabilized pavement bases under the tested laboratory and field conditions, providing evidence of its constructability and satisfactory early-age performance.

MaterialsVol. 19(22)
Tongji University (CN), Shandong Jiaotong University (CN), Ocean University of China (CN)
National Natural Science Foundation of China
Industry, innovation and infrastructure
Geotechnical and construction materials studies
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon