Fatigue Life Study of Medium Boat Made of 5052H34 Aluminium Alloy

Abstract This study presents a fatigue analysis of a medium-sized motorboat commonly used in the Amazon region, built from 5052H34 aluminium alloy. The research was motivated by the appearance of cracks in some vessels of the same model. The analysis focused on welded joints, with stresses estimated numerically using the finite element method. Pressure fields derived from regional wave data, accounting for dynamic slamming effects, were applied to a representative hull model. Fatigue life was assessed using $$\Delta \sigma -N$$ Δ σ - N (stress range-number of cycles) curves obtained experimentally from welded and unwelded specimens of equivalent plate thickness, covering the low-cycle to high-cycle fatigue transition, up to the conventional boundary of the very-high-cycle fatigue (VHCF) regime ( $$\sim 10^7$$ ∼ 10 7 cycles). Results for the most critical operating scenarios indicate a predicted fatigue crack initiation life of less than two years, suggesting that cracking may occur within this period. These findings indicate that fatigue is a key factor in the structural design of aluminium boats subjected to repetitive slamming loads.

Authors

Institutions

Publication Details

Journal
Transactions of the Indian Institute of Metals
Published
2026-11-13
DOI
https://doi.org/10.1007/s12666-026-04024-3
Primary Topic
Fatigue and fracture mechanics
Type
article
Field-Weighted Citation Impact
0.00

Funders

Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
article

Fatigue Life Study of Medium Boat Made of 5052H34 Aluminium Alloy

Alexandre Luiz Amarante Mesquita, Leonardo Dantas Rodrigues, Sérgio de Souza Custódio Filho, Matheus Miranda Duarte de Castro et al.
1 links
Transactions of the Indian Institute of Metals
Fatigue and fracture mechanics
article

Fatigue Life Study of Medium Boat Made of 5052H34 Aluminium Alloy

Alexandre Luiz Amarante Mesquita, Leonardo Dantas Rodrigues, Sérgio de Souza Custódio Filho, Matheus Miranda Duarte de Castro, Francisco Manoel Fernandes Vago
article en

Abstract

Abstract This study presents a fatigue analysis of a medium-sized motorboat commonly used in the Amazon region, built from 5052H34 aluminium alloy. The research was motivated by the appearance of cracks in some vessels of the same model. The analysis focused on welded joints, with stresses estimated numerically using the finite element method. Pressure fields derived from regional wave data, accounting for dynamic slamming effects, were applied to a representative hull model. Fatigue life was assessed using $$\Delta \sigma -N$$ Δ σ - N (stress range-number of cycles) curves obtained experimentally from welded and unwelded specimens of equivalent plate thickness, covering the low-cycle to high-cycle fatigue transition, up to the conventional boundary of the very-high-cycle fatigue (VHCF) regime ( $$\sim 10^7$$ ∼ 10 7 cycles). Results for the most critical operating scenarios indicate a predicted fatigue crack initiation life of less than two years, suggesting that cracking may occur within this period. These findings indicate that fatigue is a key factor in the structural design of aluminium boats subjected to repetitive slamming loads.

Transactions of the Indian Institute of MetalsVol. 79(12)
Universidade Federal do Pará (BR)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Universidade Federal do Pará, Pró-Reitoria de Pesquisa e Pós-Graduação, Universidade Federal do Pará
Fatigue and fracture mechanics
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon