Time-varying mesh stiffness for fast force estimation on cracked and healthy double helical gears

Abstract Time-Varying-Mesh-Stiffness (TVMS) in the context of gearing has traditionally been studied from a theoretical standpoint. This work strives to summarize in a concise manner notable literature pertaining to TVMS and proposes a methodology to extend its utility to the computation of time-dependent forces on gear flanks. This is done by calculating the share of individual tooth stiffnesses to the total mesh stiffness at any given instant of time, and relating this fraction to the instantaneous distribution of forces amongst the teeth in the mesh, under the assumption of parallel spring configuration. In this paper, the effects of the introduction of a crack in the tooth root is also investigated. Gearbox vibrations and premature tooth failure are often accompanied by time‑varying internal loading that occurs during the mesh‑in and mesh‑out phases of gear‑tooth contact. Direct finite‑element analysis of these forces is computationally prohibitive, motivating the development of an analytical framework based on time‑varying mesh stiffness (TVMS). This work presents a comprehensive TVMS model for double‑helical gear pairs that accommodates both healthy and surface‑cracked teeth. Leveraging a slice‑wise decomposition of the gear tooth—where each infinitesimal spur‑slice contributes a series of bending, shear, axial, fillet, and Hertzian compliances—the model yields closed‑form expressions for the stiffness of individual slices and aggregates them to obtain the total mesh stiffness as a function of roll angle. An explicit algorithm guides the workflow from geometry definition through force computation, including the treatment of crack geometry (straight‑line and parabolic limiting lines) and its influence on cross‑sectional area and moment of inertia. The results demonstrate that the TVMS framework provides a rapid, physics‑based alternative to full FEM analyses for evaluating gear‑tooth forces, assessing the impact of defects, and supporting dynamic‑response studies of high‑speed helical and double‑helical gear trains. Future work will focus on experimental validation and extension to multiple or more complex cracks.

Authors

Institutions

Publication Details

Journal
Research Square
Published
2026-11-13
DOI
https://doi.org/10.21203/rs.3.rs-11366043/v1
Primary Topic
Gear and Bearing Dynamics Analysis
Type
preprint
Controls
|||
ALL TIME
JAN
FEB
MAR
APR
MAY
JUN
JUL
AUG
SEP
OCT
NOV
preprint

Time-varying mesh stiffness for fast force estimation on cracked and healthy double helical gears

Behara Neha, Sophie-Maria Rauscher, Aryan Thosar
2 links
Research Square
Gear and Bearing Dynamics Analysis
preprint

Time-varying mesh stiffness for fast force estimation on cracked and healthy double helical gears

Behara Neha, Sophie-Maria Rauscher, Aryan Thosar
preprint en

Abstract

Abstract Time-Varying-Mesh-Stiffness (TVMS) in the context of gearing has traditionally been studied from a theoretical standpoint. This work strives to summarize in a concise manner notable literature pertaining to TVMS and proposes a methodology to extend its utility to the computation of time-dependent forces on gear flanks. This is done by calculating the share of individual tooth stiffnesses to the total mesh stiffness at any given instant of time, and relating this fraction to the instantaneous distribution of forces amongst the teeth in the mesh, under the assumption of parallel spring configuration. In this paper, the effects of the introduction of a crack in the tooth root is also investigated. Gearbox vibrations and premature tooth failure are often accompanied by time‑varying internal loading that occurs during the mesh‑in and mesh‑out phases of gear‑tooth contact. Direct finite‑element analysis of these forces is computationally prohibitive, motivating the development of an analytical framework based on time‑varying mesh stiffness (TVMS). This work presents a comprehensive TVMS model for double‑helical gear pairs that accommodates both healthy and surface‑cracked teeth. Leveraging a slice‑wise decomposition of the gear tooth—where each infinitesimal spur‑slice contributes a series of bending, shear, axial, fillet, and Hertzian compliances—the model yields closed‑form expressions for the stiffness of individual slices and aggregates them to obtain the total mesh stiffness as a function of roll angle. An explicit algorithm guides the workflow from geometry definition through force computation, including the treatment of crack geometry (straight‑line and parabolic limiting lines) and its influence on cross‑sectional area and moment of inertia. The results demonstrate that the TVMS framework provides a rapid, physics‑based alternative to full FEM analyses for evaluating gear‑tooth forces, assessing the impact of defects, and supporting dynamic‑response studies of high‑speed helical and double‑helical gear trains. Future work will focus on experimental validation and extension to multiple or more complex cracks.

Research Square
Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) (DE)
Gear and Bearing Dynamics Analysis
AI Navigator

Ask Laika to Summarize, Analyze, and Connect papers live on the map.

Summarize Papers & Methodologies

Extract key findings, datasets, and comparative methods across publications.

Benchmark Rankings & Visual Analytics

Rank top research institutions, authors, funders, topics, and journals by Field-Weighted Citation Impact (FWCI) and paper volume with instant charts.

Connect Distant Disciplines

Bridge topological clusters on the map to find hidden collaborative intersections.

Laika access coming soon